Support and E-Warranty Certificate www.vevor.com/support MULTI-FUNCTION VEGETABLE CUTTER INSTRUCTION MANUAL We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and doses not necessarily mean to cover all categories of tools offered by us.
MULTI-FUNCTION VEGETABLE CUTTER MODEL:QTJ-J002 QTJ-J002X QTJ-J002XE QTJ-J002XF NEED HELP? CONTACT US! Have product questions? Need technical support? Please feel free to contact us: CustomerService@vevor.com This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received.
Before operating this device, please read this instruction manual completely and keep it handy for future reference. Important Assurance Always follow basic safety precautions when using these devices. These include: 1.The device should not be used with children. There are very sharp blades on the device. Children may encounter injury accidents. Therefore, this product should be placed in a position not touched by children. 2.
11.To the replace blade sets, please ensure that the specification and models of blade plate and pressing block are consistent. WARNING Sharp Blade Hazard:Blades are sharp and can cause cuts. To avoid injury from sharp blades,handle with care.
Configuration A: 1pc 1/4inch,Installed on the product 2pcs Brush 1pc Gloves 1couple Configuration B: 1pc 3/8inch,Installed on the product 2pcs Brush 1pc Gloves 1couple Configuration C: 1pc 1/4inch,Installed on the product 1pc 1/2inch 1pc 3/8inch 6pcs 1/4”*2 1/2”*2 1pc Brush 1pc Gloves 1couple Tray 1pc 6-valve Operation Guide: View QTJ-J002X for operating guidelines.
QTJ-J002X Schematic Diagram: Configuration A: 1pc 1/4inch,Installed on the product 2pcs Brush 1pc Gloves 1couple Configuration B: 1pc 3/8inch,Installed on the product 2pcs Brush 1pc Gloves 1couple -5-
Configuration C: 1pc 1/2inch,Installed on the product 2pcs Brush 1pc Gloves 1couple Configuration D: 1pc 1/4inch,Installed on the product 1pc 1/2inch 1pc 3/8inch 1pc 6-valve pit removal 6pcs Brush 1pc Gloves 1couple 1/4”*2 1/2”*2 3/8”*2 Operation Guide: 1. Open the package, remove the equipment, and remove the fixing material on the package. 2.Place the handle in the corresponding position and insert the fastening pin for fixation ,as shown in the figure. 3.
4.The equipment blade set is comprises a blade plate and food-pushing block. When changing the blade set, it is necessary to replace the blade plate and food-pushing block at the same time. The device can be equipped with 4 different striping specifications and cutting block blade sets. 5. Grid blade is selected for cutting: cucumber, radish, potatoes,onion, pepper, fungi, scallion, and other ingredients for stripping and dicing.
3.The vibration-damping pad on the guide rod was removed, and the blade plate was removed from the guide rod. 4. Prepare the required blade plate, and in the same way, successively install the blade plate and pressure head (note: the blade mouth is facing upwards). 5. After the completion of the replacement, try to press it first to check whether there is a blade-banging phenomenon and whether the specification of the blade set is consistent.
Configuration : 1pc 6-valve,Installed on the product 1pc 1/4inch 1pc 3/8inch 1pc 6-valve pit removal 4pcs Brush 1pc Gloves 1couple Wrench 1pc 1/4”*2 3/8”*2 Operation Guide: 1.Open the package, remove the equipment, and remove the fixing material on the package. 2.Fix the mounting plate with the accessory package screw on the base, as shown in the figure, and tighten the screw. 3.Place the handle in the corresponding position and install the quick-release pin, as shown in the figure. 4.
strips can be cut into buttons by placing them in the blade again for secondary cutting. 7.Pattern blade is selected for fruit cutting, such as apples, oranges, pears and other melon and fruit 6 leaves, 6 leaves and pit removal and other cutting. 8.The size of the food to be cut shall not exceed the cutter’s edge so that the food shall be decomposed first. 9.During the operation, place the ingredients in the middle of the blade. The blade is very sharp. Do not let the hand directly touch the blade.
1pc 1/4inch,Installed on the product 1pc 3/8inch 1pc 6-valve 1pc 6-valve pit removal 4pcs Brush 1pc Gloves 1couple Tray 1pc Wrench 1pc 1/4”*2 3/8”*2 Operation Guide: 1.Open the package, remove the equipment, and remove the fixing material on the package. 2.Place the flat table as shown, check whether the four feet are flat, and adjust the four anti-slip adjustment foot pads. 3.As shown in the figure,place the handle in the corresponding position and fix it with a quick-release pin. 4.
press. 5.The equipment blade set is composes a blade plate and food-pushing block. When changing the blade set, it is necessary to replace the blade plate and food-pushing block at the same time. The device can be equipped with 4 different striping specifications and blocking blade sets. 6.Grid blade is selected to cut: cucumber, radish, potatoes, onion, pepper, fungi, scallion, and other ingredients for stripping and dicing.
blocks on the upper compression cover, and remove the food pushing block; then load the prepared food pushing block back according to the position and place it aside. 4. According to the figure, the vibration damping pad on the guide rod is removed upwards, and the cutter head is removed upwards in parallel. 5.
specification for replacement (Improper operation or cutting too hard ingredients will also damage the blade). 4.The equipment use an ultra-thin blade and cannot cut tough foods like meat and sweet potatoes. 5.The equipment must be lubricated regularly. 6.If it cannot be pressed when cutting, it indicates that the cutter plate has been worn and changed. Do not press hard. First, remove the cutter plate, replace the corresponding specification’s cutter plate, and continue using it. 7.
Support and E-Warranty Certificate www.vevor.