User`s manual

User’s Manual 45
Appendix C: UC-COM56 Jumper Setting
JP1: COM3, 4 Voltage Selector (2.0mm)
Voltage +12V(DC) R.I. * +5V(DC)
COM4 (JP1) 1-2 3-4 5-6
COM3 (JP1) 7-8 9-10 11-12
JP2: COM5, 6 Voltage Selector (2.0mm)
Voltage +12V(DC) R.I. * +5V(DC)
COM6 (JP2) 1-2 3-4 5-6
COM5 (JP2) 7-8 9-10 11-12
J2: Digital I/O Box Header Connector (2.54mm)
Pin No. Function Pin No. Function
1 DIO-O0 2 DIO-I0
3 DIO-O1 4 DIO-I1
5 +12V 6 +12V
7 KEY 8 +5V
9 GND 10 GND
46 The ENDAT-3400M System Board
Appendix D: Limited Warranty
Standard two years limited warranty on all our ENDAT series all-in-one
motherboards and embedded boards. Products that become defective during the
warranty period shall be repaired, or subject to manufacturer’s option, replaced.
The limited warranty applies to normal proper usage of the hardware and does not
cover products that have been modified or subjected to unusual electrical or
physical stress. Unicorn Computer Corp is not liable to repair or replace defective
goods caused by improper using or use of unauthorized parts. The following
situations will be charged:
1. The products during the warranty but defective caused by improper using or
artificial external pressure and result in the components damages. According to
the damage situation, the manufacturer has the rights to decide to repair or not.
The manufacturer will charge the parts/repair cost and the returning shipping
charge.
2. The products out of warranty will charge the parts/repair cost and the returning
shipping charge as per the repair status.
3. The manufacturer has the rights to decide to repair or not based on the stock of
parts for the products which are phased out of the production.
4. Please e-mail or fax the RMA Service Request Form when have the defective
products.