Install Instructions

16 | PIR Ready VT7600 Series-Installation Guide
Sequence of user menu:
OVERRIDE
RESUME
TEMPERATURE
SETPOINTS
SYSTEM
MODE
SETTING
FAN
MODE
SETTING
SCHEDULES
SETTING
CLOCK
SETTING
SCHEDULE
HOLD
Override
schd Y/N
Temperat
Set Y/N
Sys
mode
set
Y/N
Fan
mode
set Y/N
Schedule
set Y/N
Clock
set Y/N
Schedule
hold Y/N
Appears
only in
unoccupied
mode
Appears
only on
stand-alone
(Network
Ready)
models
Cancel
ovrd Y/N
Appears
only in
override
mode
Occupied setpoints adjustments
There is a default profile set in the Terminal Equipment Controller from the factory.
This enables the Terminal Equipment Controller to operate as a non-scheduling unit in
day mode operation at start up.
DEFAULT TEMPERATURE SETPOINTS: DEFAULT MODES:
Occupied cooling setpoint = 24 °C (75 °F) System mode = Auto
Occupied heating setpoint = 22 °C (72 °F)
Fan mode = Smart (for models with a
communication module
or scheduling network
ready models)
Fan mode = Auto (for non-scheduling
network ready models)
Unoccupied cooling setpoint = 28 °C (82°F)
Unoccupied heating setpoint = 18 °C (65°F)
DEFAULT SCHEDULES:
Fahrenheit scale Monday through Sunday
Setpoint type = permanent Occupied time is: 12 00 AM
Unoccupied time is: 11:59 PM