Owner`s manual

ASSEMBLYPROCEDURES
Top of Upper handle
Top Clip
Locating pin
Bottom of Upper handle
Protection
boot
Harness
Connection
15
Attaching The Battery
• Clipbatterypacktohandles,ensuringthatthelocatingpininthetopclipisinsertedinto
the hole in the top of the upper handle tube.
• Plugharnessintoconnector(thismayalreadyhavebeenconnectedatmanufacture,if
not please connect).
(Applicable to Keystart models only)
Nut
Screw
2 Stroke Models
Air filter
housing
Comfort
handle
2 Stroke Models
Slide the air filter housing onto the upper handle.
Position to locating hole in handle and secure with
screw and nut (see Fig.1). Using the 38mm screw and
nut pictured here.
Attaching The Remote Air Filter Housing - throttle control
Comfort Grip Handles
38mm (Actual size)
Top clip
Top of upper handle Bottom of upper handle
connection
Fig. 1