Owner`s manual

1 Examinetheairfilterhosingforholes,chafingandleaks.Replaceitifdamaged.

2 Remove the top cover of the air filter housing by squeezing the latch on the underside of

the housing and lifting upwards.

3 Remove the element and the foam seal ring, taking care that any loose dirt does not fall

into the filter body.

4 Dustoffthesealandexamineit.Replaceitifdamagedorpermanentlycrushed.Refit

seal to housing.

5 Clean the element by slapping it on the palm of your hand. Do not use compressed air

orwashtheelementinanyliquid.Examinetheelementforholes,splitsorpermanent

clogging. Replace the element if necessary. Refit element to housing.

6 Refit the top cover by making sure the lugs at the rear of the cover are located before

clipping in the latch.

Remote Air Filter Maintenance – Aerogrip Handles

Latch

Unclip here to

remove top

Seal ring

Lugs