Owner`s manual

ASSEMBLYPROCEDURES

Grasscatcher - hard/solid type

Assembling the grasscatcher

1 Assemble the adjustable covers 1A or directional covers 1B to the top half of the

grasscatcher

2  Locatethecentreprotrusionofthemeshintothecentreholeontheinsideofthe

catcher top, ensuring the curved edge of the mesh faces the rear handle. Firmly push

the mesh into the top half of the catcher, making sure that the four snap hooks engage

securely.

3  Looselylocatetherearhandleareasofthetopandbottomcatcherhalvesthenloosely

locate the side edges. Check that all eight hooks from the top half are loosely located

in the slots on the bottom half then firmly push the two halves together over each snap

hook. Check that all of the snap hooks have engaged securely.

4 Tighten the two screws fitted to the front of the catcher.

1A (adjustable) type

1B (directional) type