Instruction Manual

CMOR Dome
Videoswitch Page 22 Vc601i.doc
5 Menus
5.1 Menu Navigation
5.1.1 Entering Menu
Different keyboards have different ways of entering the menu system of a dome. Refer to
specific keyboard manual for details.
Common examples are:
• Videoswitch Vi-K2 Press DOME then press MENU
• Videoswitch Vi-K3 Press and hold ALT then press DOME MENU
• BBV (TX400) Press and hold SHIFT then press 1
• Pelco (KBD300A) Enter 95 then press and hold PRESET key
• DS2 Press and hold * 8,8,910,10,2
5.1.2 Moving cursor
Once in the menu, the joystick may be used for LEFT, RIGHT, UP and DOWN control of the
cursor. On a Videoswitch keyboard, the cursor keys can be used which is more convenient.
• UP move the cursor up, or change a value
• DOWN move the cursor down, or change a value
• RIGHT move the cursor right, or enter a sub-menu
• LEFT move the cursor left, or exit a sub-menu. When editing a
title, you may need to go LEFT several times to exit
5.1.3 Select
Where a select key is required (eg setting a preset from within the menu) this is also
dependent on keyboard type.
Common examples are:
• Videoswitch Vi-K2 - Press OK
• Videoswitch Vi-K3 - Press OK
• BBV (TX400) - Press 1
• Pelco (KBD300A) - Enter 96 then press and hold PRESET key
• DS2 Press Preset,10, then preset number e.g.1,2
5.1.4 Cancel
Where a cancel key is required (eg cancelling the setting of a preset from within the menu)
this is also dependent on keyboard type.
Common examples are:
• Videoswitch Vi-K2 - Press WASH
• Videoswitch Vi-K3 - Press ALT and ESC
• BBV TX400 - Press WASH
• Pelco - Enter 97 then press and hold PRESET key