Instruction Manual

CMOR Dome
Videoswitch Page 4 Vc601i.doc
1.2.2 Setting the dome address
• Set the 8-way switch (A) to the required address (camera number) of the dome as
per the table below. “0” represents OFF (down) and “1” represents ON (up).
8-way DIP switch 8-way DIP switch
Dome
Address
1 2 3 4 5 6 7 8
Dome
Address
123456 7 8
not used 0 0 0 0 0 0 0 0 16 0 0 0 0 1 0 0 0
1 1 0 0 0 0 0 0 0 17 1 0 0 0 1 0 0 0
2 0 1 0 0 0 0 0 0 18 0 1 0 0 1 0 0 0
3 1 1 0 0 0 0 0 0 19 1 1 0 0 1 0 0 0
4 0 0 1 0 0 0 0 0 20 0 0 1 0 1 0 0 0
5 1 0 1 0 0 0 0 0 21 1 0 1 0 1 0 0 0
6 0 1 1 0 0 0 0 0 22 0 1 1 0 1 0 0 0
7 1 1 1 0 0 0 0 0 23 1 1 1 0 1 0 0 0
8 0 0 0 1 0 0 0 0 24 0 0 0 1 1 0 0 0
9 1 0 0 1 0 0 0 0 25 1 0 0 1 1 0 0 0
10 0 1 0 1 0 0 0 0 26 0 1 0 1 1 0 0 0
11 1 1 0 1 0 0 0 0 27 1 1 0 1 1 0 0 0
12 0 0 1 1 0 0 0 0 28 0 0 1 1 1 0 0 0
13 1 0 1 1 0 0 0 0 29 1 0 1 1 1 0 0 0
14 0 1 1 1 0 0 0 0 30 0 1 1 1 1 0 0 0
15 1 1 1 1 0 0 0 0 31 1 1 1 1 1 0 0 0