DLPTM Projector Manual 100

10
REMOTE CONTROL DESCRIPTION
MEMORY SETTINGS BUTTONS
Four video preset memory setting buttons are available:
8. ISF NT – ISF Night
9. ISF DAY – ISF Day
10. CUST 1 – Custom One
11. CUST 2 – Custom Two
SOURCE SELECTION BUTTONS
Direct source selection buttons: These will enable direct access to desired inputs, or selection of a number in certain cases.
These buttons are:
12. VIDEO BUTTON
Press this button to select VIDEO (composite video) as the source.
13. S-VID 1 (S-VIDEO 1) and S-VID 2 (S-VIDEO 2) BUTTONS
Press either button to select between S-Video 1 and S-Video 2 inputs.
14. COMP (COMPONENT) BUTTON
Press this button to select Component SD (480i/576i) input.
15. HD1 and HD2 BUTTONS
Press either button to select between HD1 (High Definition) signal and HD2 signal inputs. Auto detect component
input, YPbPr or RGBHV.
16. DVI 1 and DVI 2 BUTTONS
Press this button to select between DVI 1 signal and DVI 2 signal input.
ASPECT RATIO BUTTONS
Aspect ratio selections - these buttons will allow you direct access to a specific aspect ratio:
17. ANA - selects Anamorphic aspect ratio
18. 4x3 - selects Standard 4:3 aspect ratio
19. LETBOX - selects Letterbox aspect ratio
20. I-WIDE - selects IntelliWide aspect ratio
21. CINEMA – selects CinemaScope aspect ratio
22. SVC – selects service menu access