DLPTM Projector Owner's Operating Manual Vision 50

Installation
Vidikron Vision 50 Series Owner’s Operating Manual 19
PRE
L
IMINAR
Y
3.4
Installing the Optional
CineWide Lens Mount
If you are installing a standard (non-CineWide) Vision 50, skip this step and proceed with
Mounting the Vision 50 (page 24).
If you are installing a Vision 50/CineWide, proceed with Installing the Fixed CineWide Base
Plate (Vision 50/CineWide) (page 23).
If you are installing a Vision 50/CineWide with AutoScope, proceed as follows to install the
AutoScope lens motor.
1. Do not install the CineWide lens yet, only the fixed CineWide base plate
or AutoScope lens motor. You will install the CineWide lens after you
install the projector and adjust the primary lens.
2. Some components shipped with your projector may differ slightly
from what is shown in these instructions.
Note