VIZIO VO47L FHDTV10A User Manual Dear VIZIO Customer, Congratulations on your new VIZIO VO47L FHDTV10A LCD Television purchase. Thank you for your support. For maximum benefit of your set, please read these instructions before making any adjustments, and retain them for future reference. We hope you will experience many years of enjoyment from your new VIZIO VO47L FHDTV10A Television. please call 877-MYVIZIO or e-mail us at techsupport@vizio.com.
VIZIO VO47L FHDTV10A User Manual THIS PRODUCT HAS BEEN DESIGNED AND TESTED FOR COMPLIANCE WITH REGULATORY SAFETY CERTIFICATIONS This product is designed and manufactured to operate within defined design limits, and misuse may result in electric shock or fire. To prevent the product from being damaged, the following rules should be observed for the installation, use and maintenance of the product. Read the following safety instructions before operating the display.
VIZIO VO47L FHDTV10A User Manual Television Antenna Connection Protection External Television Antenna Anten na Grounding If an outside antenna/satellite dish or cable system is to be connected to the TV, make sure that the antenna or cable system is electrically grounded to provide some protection against voltage surges and static charges.
VIZIO VO47L FHDTV10A User Manual Opening the Package Your VIZIO VO47L FHDTV10A and it accompanying accessories are carefully packed in a cardboard carton that has been designed to protect it from transportation damage. Now you have opened the carton check that the VO47L FHDTV10A is in good condition and that all of the accessories are included. The VO47L FHDTV10A weighs approximately 78lbs and about 45” wide x 30” tall we strongly advise that you have at least 2 people to unpack and install the HDTV.
VIZIO VO47L FHDTV10A User Manual Additional Certified Accessories for the the VIZIO VO47L FHDTV10A are sold separately Wall Mounts High Definition Cables Extra or replacement Remote VIZIO also offers Installation Services and Extended Warranty Services for your VIZIO VO47L FHDTV10A To purchase or inquire about additional accessories and services for your VIZIO product, visit our web site at www.vizio.
VIZIO VO47L FHDTV10A User Manual Preparing Your LCD HDTV for Wall Mounting The VIZIO VO47L FHDTV10A can either be kept on the stand base or mounted on the wall for viewing. If you choose to mount the VO47L FHDTV10A on the wall, please follow the instructions below for removing the stand base. To remove the stand base 1. Unplug all of the cables and cords from your VO47L FHDTV10A. 2. Place the VO47L FHDTV10A face down on a soft and flat surface (blanket, foam, cloth, etc) to prevent any damage to the TV.
VIZIO VO47L FHDTV10A User Manual Table of Contents Chapter 1 Basic Controls and Connections ................................................................ ................................................................. ................................. 9 1.1 Front Bezel..........................................................................................................................................................9 1.2 Right Side Panel Controls ...................................................
VIZIO VO47L FHDTV10A User Manual 4.5 DTV / TV Tuner Setup.......................................................................................................................................42 4.5.1 Tuner Mode ...............................................................................................................................................42 4.5.2 Auto Search.........................................................................................................................................
VIZIO VO47L FHDTV10A User Manual Chapter 1 Basic Controls and Connections 1.1 Front Bezel Power ‘VIZIO’ light – The VIZIO name lights white when powered on and orange when powered off. Remote Control Sensor – This is the window through which all of the remote control signals pass to the sensor. Point the remote control directly at this window for the best response to the remote signal. 1.2 Right Side Panel Controls Power ( ) – Switch the VO47L FHDTV10A on by pressing the button once.
VIZIO VO47L FHDTV10A User Manual 1.3 Rear Panel Connections 1 2 4 3 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 5 8 6 7 9 10 13 11 14 12 AC IN – Plug-in the supplied AC Power Cord here. SERVICE – This custom communication port is for factory service only. Use of this input for any purpose other than factory authorized service will void the manufacturer’s warranty of this equipment.
VIZIO VO47L FHDTV10A User Manual 12. 13. 14. OPTICAL DIGITAL AUDIO OUT – When the DTV input is selected for viewing, the digital audio associated with digital programming will be available on this SPDIF Optical connector for connection to your home theatre system. The white color band on the rear of the TV indicates this connection. ANALOG AUDIO OUT – Connect the audio from the LCD HDTV to an external device, such as a home theatre system, external amplifier or stereo.
VIZIO VO47L FHDTV10A User Manual 1.4 VIZIO Universal Remote Control The VIZIO Universal Remote Control is a comprehensive remote that can be used to control up to four different components. The remote button functions are explained on the following pages. Remote LED – Blinks when the remote operates. This button starts all programming of the Remote Control. Press this button to turn the TV on from the Standby mode. Press it again to return to the Standby mode. This button selects a programmed DVD player.
VIZIO VO47L FHDTV10A User Manual Use this button for the On-Screen Display (OSD) menus. This button displays the image and system information display. Use the NaVigation Wheel to operate the On-Screen Display (OSD) after it has been activated by pressing the MENU button. Use the OK button to select your chosen option in OnScreen Display (OSD) menus. GUIDE – This button displays program information. button is only functional for DTV.
VIZIO VO47L FHDTV10A User Manual When CABLE is selected and the code to match your Cable (or Satellite) Box has been entered, this button will operate the Cable (or Satellite) Box the same as this button on your Cable (or Satellite) Remote. When TV is selected, this button activates Picture-in-Picture mode. When CABLE is selected and the code to match your Cable (or Satellite) Box has been entered, this button will operate the Cable (or Satellite) Box the same as this button on your Cable Remote.
VIZIO VO47L FHDTV10A User Manual 1.4.1 Insertion of Batteries in the Remote Control Insert two AA batteries into the remote control. Make sure that you match the (+) and (-) symbols on the batteries with the (+) and (-) symbols inside the battery compartment. Re-attach the battery cover. Precautionary Tips for Inserting the Batteries: Only use the specified AA batteries. Do not mix new and old batteries. This may result in cracking or leakage that may pose a fire risk or lead to personal injury.
VIZIO VO47L FHDTV10A User Manual Chapter 2 Connecting Equipment 2.1 Which Video Connection Should I Use? Use? The VIZIO VO47L FHDTV10A has six different ways to connect your video equipment from a basic connection to the most advanced for digital displays.
VIZIO VO47L FHDTV10A User Manual 2.2 Connecting Your Cable or Satellite Box 2.2.1 Using HDMI Cable and Satellite Boxes that have a HDMI digital interface should be connected to the HDMI input of the LCD HDTV for optimal results. Note: To maintain the display quality, use a VIZIO certified HDMI cable that is 10 meters or less. See www.vizio.com or call 1-888-VIZIOCE (1-888-849-4623) for details. Connecting your Cable or Satellite Box (Best) 1. 2. 3. 4.
VIZIO VO47L FHDTV10A User Manual For Cable or Satellite Boxes with DVI: DVI: 1. 2. Turn off the power to the LCD HDTV and HDTV Set-Top Box. Using a HDMI-DVI cable, connect the DVI end to your HDTV Set-Top Box and the HDMI end to the HDMI4 Input (white color area) at the rear of the LCD HDTV.
VIZIO VO47L FHDTV10A User Manual 2.2.2 Using Usi ng Component Video Connecting your Cable or Satellite Box (Better) 1. 2. Turn off the power to the LCD HDTV and HDTV Set-Top Box. Connect the Y (green color) connector on your HDTV Set-Top Box to the corresponding Y (green color) connector in the Component 1 group (green color area - row of connectors nearest to you when viewing from the rear of the TV) at the rear of the LCD HDTV.
VIZIO VO47L FHDTV10A User Manual 2.3 Connecting Coaxial (RF) (RF) 2.3.1 Using Your Antenna or Digital Cable for DTV 1. 2. 3. 4. Note: a) b) c) d) Turn off the power to the LCD HDTV. Connect the coaxial (RF) connector from your antenna or digital cable to the DTV/TV CABLE/ANTENNA connector at the rear of the LCD HDTV. Turn on the power to the LCD HDTV. Select DTV using the INPUT button on the remote or side of the LCD HDTV, or directly by pressing the TV button on the Remote Control.
VIZIO VO47L FHDTV10A User Manual 2.3.2 Using Your Antenna or Cable for TV 1. 2. 3. 4. Turn off the power to the LCD HDTV. Connect the coaxial (RF) connector from your antenna or cable to the DTV/TV CABLE/ANTENNA connector at the rear of the LCD HDTV Turn on the power to the LCD HDTV. Select TV using the INPUT button on the remote or side of the LCD HDTV, or directly by pressing the TV button on the Remote Control. 2.3.3 Using the Antenna or Cable through your VCR 1. 2. 3. 4.
VIZIO VO47L FHDTV10A User Manual 2.4 Connecting Your DVD Player You have several options for connecting your DVD player to your VO47L FHDTV10A – HDMI, Component, S-Video and Composite (AV) inputs. Based on your home theater configuration, you can decide which option is the right one for you. 2.4.1 Using HDMI DVD players that have a digital interface such as HDMI (High Definition Multimedia Interface) should be connected to the HDMI input of the VIZIO VO47L FHDTV10A for optimal results.
VIZIO VO47L FHDTV10A User Manual For DVD Players with DVI: DVI: 1. 2. 3. 4. 5. Note: a) b) Turn off the power to the LCD HDTV and DVD player. Using a HDMI-DVI cable, connect the DVI end to your DVD player and the HDMI end to the HDMI4 Input (white color area) at the rear of the LCD HDTV.
VIZIO VO47L FHDTV10A User Manual 2.4.2 Using Component Video Connecting your DVD Player (Better): (Better): 1. 2. Turn off the power to the LCD HDTV and DVD player. Connect the Y (green color) connector on your DVD player to the corresponding Y (green color) connector in the Component 1 group (green color area - row of connectors nearest to you when viewing from the rear of the TV) at the rear of the LCD HDTV.
VIZIO VO47L FHDTV10A User Manual 2.4.3 Using SS -Video (AV2 (AV 2) Connecting your DVD Player (Good): (Good): 1. 2. 3. 4. 5. Turn off the power to the LCD HDTV and DVD player. Connect the S-Video jack on the rear of your DVD player to the S-Video jack in the AV2 at the rear of the LCD HDTV.
VIZIO VO47L FHDTV10A User Manual 2.4.4 Using Composite (AV) (AV ) Video Connecting your DVD Player (Good): (Good): 1. 2. 3. 4. 5. Turn off the power to the LCD HDTV and DVD player. Connect the Video (yellow color) connector on your DVD player to the Video (yellow color) connector in the AV1 input row (yellow color area) of connectors at the rear of the LCD HDTV.
VIZIO VO47L FHDTV10A User Manual 2.5 Connecting Your VCR or Video Camera 1. 2. 3. 4. 5. Turn off the power to the LCD HDTV and VCR or Video Camera. Connect the S-Video jack on the rear of your VCR or Video Camera to the S-Video jack in the AV2 group (red area color) at the back of the LCD HDTV.
VIZIO VO47L FHDTV10A User Manual 2.6 Connecting an external Receiver/Amp Receiver/Amp 1. 2. 3. 4. 5. 6. 7. Note: a) b) Turn off the power to the LCD HDTV and Receiver/Amp. Using an audio cable (white and red connectors), connect the cable to the audio input connectors on the Receiver/Amp and connect the other end to the ANALOG OUT (white area) audio connectors at the rear of the LCD HDTV. Turn on the power to the LCD HDTV and Receiver/Amp.
VIZIO VO47L FHDTV10A User Manual 2.7 Connecting a PC Computer 1. 2. 3. 4. 5. Note: a) b) c) Turn off the power to the LCD HDTV and PC Computer. Connect a 15-pin D-Sub RGB (VGA) cable to the RGB output of your pc computer and the other end to the RGB PC input (blue area) at the rear of the LCD HDTV. Connect the Audio Out on your pc computer to the RGB PC Audio input (blue area) at the rear of the LCD HDTV. Turn on the power to the LCD HDTV and PC Computer.
VIZIO VO47L FHDTV10A User Manual 2.7.1 Preset PC Resolutions If connecting to a PC through the RGB PC input, set the TV timing mode to VESA 1360x768 at 60Hz for better picture quality (refer to the graphic card’s user guide for questions on how to set this timing mode). Please see the table below for the factory preset resolutions. Also see chart in Section 2.7.2, for the best resolution that can be obtained through RGB PC input when video card supports 1920x1080 resolution. Resolution Refresh (Hz) H.
VIZIO VO47L FHDTV10A User Manual Chapter 3 Setting Up to Watch Television For ‘Preparing Your LCD HDTV for Wall Mounting’, see page 6. 3.1 Basic LCD HDTV Start Up 1. Connecting the Power Cable Connect the power cord to the power cord connector on the back of the LCD HDTV, and then plug the power cord into an AC wall socket. 2. Connect Audio and Video Cables to the LCD HDTV (see pages 16 ~ 29 for detailed steps) 3.
VIZIO VO47L FHDTV10A User Manual b. The Language choice screen will be displayed; the default English option is highlighted. If you wish to change the OSD language to Français or Español, press the button on the remote control to select the language you want. Press the button on the remote to go to the next screen. c. The Tuner screen will be displayed; default choice is Antenna. If you are using Cable, press the button to highlight CABLE. Press the button on the remote to go to the next screen. d.
VIZIO VO47L FHDTV10A User Manual e. Press the OK button to start the search. An information panel will be displayed showing the progress of the search for analog (NTSC) and Digital (ATSC) channels. Note: DTV digital broadcast is not available in all areas. Refer to www.antennaweb.org to get information about availability in your area, type of antenna and in which direction to point your antenna.
VIZIO VO47L FHDTV10A User Manual 3.2 Watching a TV TV Program Before you start watching TV, please make sure that any cable, satellite or off-air antenna connections are secure. Also, verify that the power cord is plugged into a correctly grounded electrical outlet or surge protector. 1. 2. Press the power button on the remote or on the side of the LCD HDTV. The status of the VIZIO the front will change from orange to white.
VIZIO VO47L FHDTV10A User Manual 3.4 Program Information Press the GUIDE button on the remote and program information for the channel you are watching will be displayed on the screen with the live program content in a small window in the lower left corner of the panel. Press the or button to scroll up or down the channels. Each time you pause at a channel, the program list will update with the program schedule for the channel and the window will show the live program for that channel.
VIZIO VO47L FHDTV10A User Manual Chapter 4 Advanced Adjustment of HDTV HDTV 4.1 Using the On Screen Display (OSD) The remote control or the control buttons on the right hand side of the TV can control all the function settings. The On Screen Display (OSD) allows you to adjust the save contrast, brightness and other settings. The TV will save changes made to the settings, even if the TV is turned off. The OSD consists of several menu options: Picture, Audio, Setup, TV and Parental.
VIZIO VO47L FHDTV10A User Manual 4.2 DTV / TV Input Picture Adjustment 4.2.1 Picture Mode When the MENU button is pressed, the On Screen Display (OSD) appears on the PICTURE menu. Press the button to highlight the Picture Mode selection. Use the or Movie or Game. button to choose from Custom, Standard, If Standard, Movie or Game is chosen for the Picture Mode, you will still be able to adjust the settings. 4.2.2 Backlight Press the button to highlight the Backlight selection.
VIZIO VO47L FHDTV10A User Manual 4.2.3 Contrast Press the button to highlight the Contrast selection. Press the button to start adjusting the contrast and the menu page will disappear and be replaced by a small Contrast Indicator Bar so you can see the contrast level between the minimum and maximum available levels. Use the or button to adjust the level. The Contrast adjusts the white levels in the picture.
VIZIO VO47L FHDTV10A User Manual 4.2.7 Sharpness Press the button to highlight the Sharpness selection. Press the button to start adjusting the sharpness and the menu page will disappear and be replaced by a small Sharpness Indicator Bar so you can see the sharpness level between the minimum and maximum available levels. Use the or button to adjust the level. The Sharpness adjusts the sharpness of the picture. 4.2.
VIZIO VO47L FHDTV10A User Manual 4.3 Advanced Video Press the button to highlight the option for Advanced Video selection and press the OK button. A new menu will be displayed showing the advanced functions available for fine tuning of the picture. 4.3.1 DNR Press the button to highlight DNR (Dynamic Noise Reduction). Use this feature to diminish picture artifacts caused by the digitizing of image motion content that may be present in the picture.
VIZIO VO47L FHDTV10A User Manual 4.4 DTV / TV Input Audio Adjustment 4.4.1 Volume When the MENU button is pressed, the On Screen Display (OSD) shows the PICTURE menu page. Press the button to display the AUDIO Menu page. Press the button to highlight the Volume selection. Press the button to start adjusting the volume and the menu page will disappear and be replaced by a small Volume Indicator Bar so you can see the volume level between the zero and maximum available levels.
VIZIO VO47L FHDTV10A User Manual 4.4.5 Surround Press the Press the button to highlight the Surround selection. button to select for the simulated surround sound feature to be On or Off. 4.4.6 Speakers Press the button to highlight the Speakers selection. Press the button to turn the internal speakers On or Off. You may want to turn-off the internal speakers when listening to the audio through your Home Theatre System. 4.
VIZIO VO47L FHDTV10A User Manual 4.5.4 Digital Audio Out Press the button to select this feature. The options are Off, Dolby Digital and PCM. Press the or button to select the desired output when an external sound system is used. 4.5.5 Time Zone Setting the correct Time Zone for your area will ensure that the correct program times are shown after pressing the GUIDE button on the remote control. Press the button to highlight the Time Zone selection. Press the button to select your area. 4.5.
VIZIO VO47L FHDTV10A User Manual 4.6 DTV / TV Input Setup 4.6.1 Language When the MENU button is pressed, the On Screen Display (OSD) shows the PICTURE menu page. Press the button until the SETUP page is displayed. Press the button to highlight the Language selection. The default is English. Press the button to select Français or Español. 4.6.2 Sleep Timer Press the button to highlight the Sleep Timer selection. Press the turn-off the TV in 30, 60, 90 or 120 minutes. button to select the timer to 4.6.
VIZIO VO47L FHDTV10A User Manual 4.6.6 PIP (Picture(Picture-inin -Picture) Picture-in-Picture is a feature which allows you to watch two different signal inputs simultaneously. Press the button and highlight the option. Press the button to activate the PIP feature, which will bring up a display showing Style. Press the or button to select PIP, POP or OFF.
VIZIO VO47L FHDTV10A User Manual 4.7 DTV / TV Input Parental Control 4.7.1 Channel Block If you want to restrict certain channel and program viewing, you can do this by turning on the Parental Control. Selected programs, movies and channels can then be made available only after an authorized password has been entered and accepted by the TV. When the MENU button is pressed, the On Screen Display (OSD) shows the PICTURE menu page. Press the button to display the PARENTAL menu page.
VIZIO VO47L FHDTV10A User Manual 4.7.2 TV Rating Follow the procedure in the previous section 4.7.1 to display the Parental Control menu and then press the button to highlight the TV Rating selection. Press the button and the Block TV Rating panel will be displayed.
VIZIO VO47L FHDTV10A User Manual 4.7.3 Movie Rating Press the button to highlight the Movie Rating selection. Press the button and the Block Movie Rating panel will be displayed.
VIZIO VO47L FHDTV10A User Manual 4.7.5 Blocked Unrated Programming Follow the procedure in the previous section 4.7.1 to display the Parental Control menu and then press the button to highlight the Block Unrated TV selection. Press the button to turn-on or turn-off the blocking of programming that does not have a rating. 4.7.6 Change the Password Press the button to highlight the Access Code Edit selection. Press the button and the new Password panel will be displayed.
VIZIO VO47L FHDTV10A User Manual 4.8 HDMI Input Picture Adjustment The Picture Adjust menu operates in the same way for the HDMI Input as for the DTV / TV input in section 4.2. The menu difference is that there is no icon along the top for DTV / TV or Parental Control adjustments. 4.9 HDMI Input Audio Adjustment The Audio Adjust menu operates in the same way for the HDMI Input as for the DTV / TV input in section 4.4.
VIZIO VO47L FHDTV10A User Manual 4.11 Video Input Picture Adjustment The Picture Adjust menu operates in the same way for Video Inputs (Component and AV) as for the DTV / TV input in section 4.2. The menu difference is that there is no icon along the top for DTV / TV adjustments. 4.12 Video Input Audio Adjustment The Audio Adjust menu operates in the same way for Video Inputs (Component and AV) as for the DTV / TV input in section 4.4.
VIZIO VO47L FHDTV10A User Manual 4.14 Video Input Parental Control The Parental Control menu operates in the same way for Video Inputs (Component and AV) as for the DTV / TV input in section 4.7. The menu difference is that there is no icon along the top for DTV / TV adjustments. 4.15 PC Input Picture Adjustment The Picture Adjust menu operates in the same way for the PC Input as for the DTV / TV input in section 4.2 for Backlight, Contrast, Brightness and Color Temperature. 4.15.
VIZIO VO47L FHDTV10A User Manual 4.15.3 Brightness Press the button to highlight the Brightness selection. Press the button to start adjusting the brightness and the menu page will disappear and be replaced by a small Brightness Indicator Bar so you can see the brightness level between the minimum and maximum available levels. Use the or button to adjust the level. The Brightness adjusts the black levels in the picture.
VIZIO VO47L FHDTV10A User Manual 4.15.5 Color Temperature Press the button to highlight the option for Color Temperature selection. The default is COOL; this is the 9300K setting. Press the or button if you want to choose the Normal, Warm or Custom option. If you choose the Custom option, then a new menu will be displayed showing the primary color items, Red, Green and Blue. Press the button to highlight the color you wish to adjust.
VIZIO VO47L FHDTV10A User Manual 4.15.9 Fine Tune Press the Press the button to highlight the Fine Tune selection. button to start tuning the to the PC signal. Use the 4.16 PC Input Audio Adjustment The Audio Adjust menu operates in the same way for the PC Input as for the DTV / TV input in section 4.4. The menu difference is that there are no icons along the top for DTV / TV and Parental Control adjustments. 4.
VIZIO VO47L FHDTV10A User Manual 4.18 Understanding Viewing Modes Normal Mode The original 4:3 aspect ratio (1.33:1 source) is preserved, so black bars are added to the left and right of the display image. Standard TV broadcasts are displayed with a 4:3 Aspect Ratio. Movies in 4:3 Aspect Ratio may be referred to as pan-and-scan or full frame. These movies were originally filmed in 16:9 (widescreen), and then modified to fit a traditional TV screen (4:3).
VIZIO VO47L FHDTV10A User Manual 4.18.1 Picture Picturecture- InIn - Picture (PIP) Mode Your TV features PIP mode so you can watch two pictures at the same time. When PIP is turned on, you can display two pictures at one time. One picture is displayed as the full screen (main screen) and the other picture is displayed in a small window (sub screen). The sub-screen can be set to small, medium or large. See below for detailed information regarding the PIP sources.
VIZIO VO47L FHDTV10A User Manual 4.18.2 Adjusting Basic PIP Settings The PIP channel is independent of the main TV channel. To change the PIP channel, press the PIP CH button on the remote control. Alternatively, you can change the PIP channel by pressing the CH+ or CH- button. Repeated pressing of the PIP button will turn on, turn off the PIP mode. Press the PIP SIZE button to alternate between Small, Medium and Large PIP sizes.
VIZIO VO47L FHDTV10A User Manual 4.19 Programming the VIZIO Universal Remote Control You can program the remote control to work with up to four different pieces of equipment including your VIZIO VO47L FHDTV10A. Listed below are the steps for programming your VCR, Cable Box and DVD Player. 4.19.1 Programming for VCR 1. 2. 3. 4. Manually turn on the VCR. Press the VCR button on the remote control. Press and hold the SET button until the LED LIGHT flashes twice.
VIZIO VO47L FHDTV10A User Manual 4.19.3 Programming for DVD Player 1. 2. 3. 4. Manually turn on the DVD Player. Press the DVD button on the remote control. Press and hold the SET button until the LED LIGHT flashes twice. Find the programming code for your DVD player in the code list in the back of this book and enter it using the Number Buttons. If the code is accepted, the LED flashes twice after the last digit is entered.
VIZIO VO47L FHDTV10A User Manual Note: Some buttons may not function as expected on your cable or satellite remote. Typically power, volume and mute will work. Chapter 5 Maintenance and Troubleshooting Troubleshooting 5.1 Maintenance Important 1. 2. Make sure that the power cable is removed from the socket before cleaning the TV. Do not use volatile solvent (such as toluene, rosin and alcohol) to clean the TV. Such chemicals may damage the housing, screen glass and remote control, and cause paint to peel.
VIZIO VO47L FHDTV10A User Manual Problem Solution Press the Volume + (Up) key on your remote control Make sure that headphones are not connected If the screen is black. Check your input connections. Power is ON but no screen image. Make sure the video cable supplied with the TV is secured to the correct video output port on the back of the VCR and the TV. Make any cable you have attached to the TV is secured to the correct output your Set-Top Box, DVD, etc. A djust brightness and contrast.
VIZIO VO47L FHDTV10A User Manual Problem Solution You switch to a different input and the screen size changes. The TV remembers the viewing mode from the last time you used a particular input (AV1, AV2, Component 1, Component 2, HDMI 1, HDMI 2, HDMI 3, HDMI 4 and TV). Tips for High-Definition Users. The LCD HDTV is an ideal platform for viewing High Definition Content. Best Image Quality will be achieved by the HDMI Input, then YPbPr, then RGB.
VIZIO VO47L FHDTV10A User Manual 5.4 Compliance Caution: Always use a power cable that is properly grounded. Please use the AC cords listed below for each area. USA Canada Germany UK Japan UL CSA VDE BASE/BS Electric Appliance Control Act 5.5 FCC Class B Radio Interference Statement Statement NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
VIZIO VO47L FHDTV10A User Manual Chapter 6 Miscellaneous Information 6.1 Specifications Specifications Panel 47” Diagonal, 16:9 Aspect Ratio Resolution 1920 x 1080 pixels Pixel (Dot) Pitch 0.5415mm (H) x 0.5415mm (V) Display/Signal Compatibility 1080P (Full HDTV) , 1080i (HDTV) , 720P (HDTV) , 480P (EDTV) 480i (SDTV) Colors 16.
VIZIO VO47L FHDTV10A User Manual 6.2 Glossary – Standard Definitions Analog TV: Today’s TV system using radio frequency waves to transmit and display pictures and sound. Aspect Ratio (4x3): Traditional TV “aspect ratio”, that is, the screen’s width as compared to its height. For example, a “32 inch TV screen” would be 25 inches wide and 19 inches tall. Aspect Ratio (16x9): “Wide screen TV” aspect ratio which is more like a movie screen than a traditional TV.
VIZIO VO47L FHDTV10A User Manual 6.
VIZIO VO47L FHDTV10A User Manual Parental Lock Enable, 46 Password change, 49 TV Rating, 47 PC Input Audio Adjustment, 52, 55 Picture Adjustment, 51, 52 Setup, 55 PIP and POP Inputs, 57 R Remote Batteries, 15 Layout, 12, 15, 59 Range, 15 Remote Control Codes for other devices.
VIZIO VO47L FHDTV10A User Manual 6.
VIZIO VO47L FHDTV10A User Manual Setup Code for VCR’s Setup Code for VCR’s Pentax 20042 Sylvania Philco 20035, 20479 20035, 20081, 20043 Bell South 00899 Systemax 21972 Clearmaster 00883 Tagar Systems 21972 ClearMax 00883 Philips 20035, 20081, 20739, 20618 Setup Code for Cable Converters Pilot 20037 Tashiko 20037 Coolmax 00883 Pioneer 20042, 20067 Tatung 20045, 20067 Daeryung Polk Audio 20081 Technics 20035, 20162 01877, 00877, 00477, 00008 Profitronic 20240 Teco 200
VIZIO VO47L FHDTV10A User Manual Setup Code for Cable Converters Setup Code for Satellite Receivers Starcom 00003, 00014 HTS 00775 Supercable 00276 Supermax 00883 Hughes Network Systems 01142, 00749, 01749, 01442 Tocom 00012 I-Lo 01535 Torx 00003 JVC 00775 Toshiba 00000 LG Trans PX 00276 Tristar 00883 TS 00003 V2 00883 Viewmaster 00883 Vision 00883 Vortex View 00883 Zenith 00000, 00525, 00899 Setup Code for Satellite Receivers AlphaStar 00772 Chaparral 00216 Cross
VIZIO VO47L FHDTV10A User Manual Setup Code for DVD Players Setup Code for DVD Players Setup Code for CD Players Lasonic 20798 Shinsonic 20533 Magnavox 30157 LG 20591, 20869, 20801 Sonic Blue 20869, 21099 Marantz Sony Liquid Video 21980 MCS 30029 Lite-On 21158, 21058 20533, 20864, 21033, 21904, 21903 30626, 30029, 30157 Miro 30000 Mission 30157 MTC 30420 Loewe Magnavox 20511 20503, 20539, 21976, 21914, 20675 SVA 20717 Sylvania 20675 Symphonic 20675 NSM 30157 Teac 207
VIZIO VO47L FHDTV10A User Manual Setup Code for CD Players Victor 30072 Wards 30157, 30053 Yamaha 30888, 30036 Zonda 30157 Setup Code for Audio Amplifiers Setup Code for Audio Amp/Tuners Inkel 30027 Integra 30135 JBL 30110 JVC 30074, 31263 Kenwood 31313, 31570, 30027 KLH 31428 Magnavox 31189, 31269, 30531 Marantz 31189, 31269, 30039 MCS 30039 Onkyo 30842, 30135 Optimus 31023, 30670, 30531, 31074 Bose 30674 GE 30078 JVC 30331 Marantz 30321 Nakamichi 30321 NEC 30264
VIZIO VO47L FHDTV10A User Manual Setup Code for TV’s Setup Code for TV’s Setup Code for TV’s Chung Hsin 10180, 10053 Furi 10145 JVC Cinema 10672 Futuretech 10180 10053, 11923, 11253 Citizen 10060, 10030, 11928, 10092 Gateway 11756, 11755 Kangli 10661 GE 11447, 10047, 11454, 10051, 10451, 10180, 10030, 10178, 11917, 10092, 11907, 11922 KEC 10180 Kenwood 10030 KLH 10765, 10767 Kolin 10180, 10150, 10053 Clarion 10180 Commercial Solutions 11447, 10047 Conrowa 10156, 10145, 111
VIZIO VO47L FHDTV10A User Manual Setup Code for TV’s Setup Code for TV’s Setup Code for TV’s Multitech 10180 Qingdao Sony NAD 10156, 10178, 10866 Quasar 10250, 10051, 11924, 10650 11100, 10000, 10650, 11925, 11904 National 10051 RadioShack Soundesign 10180, 10178 NEC 10154, 10156, 10051, 10053, 10030, 10178, 11704 10047, 10154, 10180, 10030, 10178, 11920, 11904 Sowa 10156, 10051, 10060, 10178, 10092 Squareview 10171 SSS 10180 Starlite 10180 Studio Experience 10843 Newave 1009
VIZIO VO47L FHDTV10A User Manual Setup Code for TV’s Setup Code for TV’s Setup Code for TV’s Tuntex 10030, 10092 Vidtech 10178 Westinghouse 10623 TVS 10463 Viewsonic Yamaha 10030 VIZIO 11758, 11756, 10885, 10864 11755, 10885, 10864 Yapshe 10250 Wards 10054, 10030, 10178, 10866, 11156 Zenith Warumaia 10661 10017, 10463, 10178, 11904, 11929, 11911, 11909, 100920 Waycon 10156 White 10463, 11909, Vector Research 10030 Victor 10250, 10053, 10650 Vidikron 10054 Version 11/7/200