Installation Guide

Limited Warranty
41 of 44
IM-PP 724607 0320 ProPress
5.3 Limited Warranty for Viega Marine Applications
Marine applications are de󶈵ned as mobile structures used to
navigate water or stationary structures in water.
Subject to the terms and conditions of this Limited Warranty, Viega LLC
(Viega) warrants to end users, installers and distribution houses that its
Viega metal press products (Viega product) when properly installed in
approved marine applications and other products sold by Viega LLC
when properly installed in marine applications in accordance with our
listings shall be free from failure caused by manufacturing defects for a
period of two (2) years from date of installation. This warranty applies only
to approved applications. Installations that are not approved shall not be
covered by this warranty and shall not be the responsibility of Viega LLC.
Under this Limited Warranty, you only have a right to a remedy if the
failure or leak resulted from a manufacturing defect in the Viega product
and the failure or leak occurs during the warranty period. You do not have
a remedy under this warranty and the warranty remedy does not apply
if the failure or any resulting damage is caused by (1) components other
than those sold by Viega; (2) not designing, installing, inspecting, testing,
or maintaining the Viega product in accordance with Viega’s installation
and product instructions in e󶈴ect at the time of installation and other
speci󶈵cations and approvals applicable to the installation; (3) improper
handling and protection of the Viega product prior to, during and after
installation, inadequate freeze protection, or exposure to environmental or
operating conditions not recommended for the application; or (4) acts of
nature, such as, but not limited to earthquakes, 󶈵re, or weather damage.
Final approval as to use compatibility to a speci󶈵c process or 󶈶uid
application is the responsibility of the engineer of record or responsible
design/facilities personnel and this Limited Warranty only applies to
manufacturing defects in the Viega Product.
In the event of a leak or other failure in the Viega product covered by
this warranty, it is the responsibility of the end user to take appropriate
measures to diminish any damage, to include making timely repairs. Only
if the warranty applies will Viega be responsible for the remedy under this
warranty. The part or parts which you claim failed should be kept and
Viega contacted by writing to the address below or telephoning 1-800-
976-9819 within thirty (30) calendar days after the leak or other failure and
identifying yourself as having a warranty claim. You should be prepared
to ship, at your expense, the product which you claim failed due to a
manufacturing defect, document the date of installation, and the amount
of the repair or replacement if performed by you. Within a reasonable
time after receiving the product, Viega will investigate the reasons for the
failure, which includes the right to inspect the product at a Viega location
and reasonable access to the site of damage. Viega will notify you in
writing as to the results of its review.
In the event that Viega determines that the failure or leak was the result
of a manufacturing defect in the Viega Product covered by this warranty
and to which this warranty applies, the EXCLUSIVE AND ONLY REMEDY