Installation Guide

Limited Warranty
39 of 44
IM-PP 724607 0320 ProPress
warranty shall be the reimbursement for repair and/or replacement of
the part. VIEGA SHALL NOT BE LIABLE FOR ANY CONSEQUENTIAL
OR OTHER DAMAGE (FOR EXAMPLE, WATER OR PROPERTY OR
MOLD REMEDIATION) UNDER ANY LEGAL THEORY AND WHETHER
ASSERTED BY DIRECT ACTION, FOR CONTRIBUTION OR INDEMNITY
OR OTHERWISE.
THE ABOVE WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES,
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE. If a limited warranty shall be found to apply,
such warranty is limited to four years. Other than this Limited Warranty,
Viega does not authorize any person or 󶈵rm to create for it any other
obligation or liability in connection with its products.
This Limited Warranty gives you speci󶈵c legal rights and you also may
have other rights which may vary from state to state. This warranty shall
be interpreted and applied under the law of the state in which the product
is installed and is intended as a Commercial Warranty.
5.2 Limited Warranty for Viega Metal Systems for Industrial Applications
Industrial applications are de󶈵ned as non-residential and non-
commercial applications not normally accessible to the general
public, including manufacturing, mining, process or fabrication
environments.
Subject to the terms and conditions of this Limited Warranty, Viega LLC
(Viega) warrants to end users, installers and distribution houses that its
Viega metal press products (Viega product) when properly installed in
industrial applications shall be free from failure caused by manufacturing
defects for a period of two (2) years from date of installation.
Under this Limited Warranty, you only have a right to a remedy if the
failure or leak resulted from a manufacturing defect in the Viega product
and the failure or leak occurs during the warranty period. You do not have
a remedy under this warranty and the warranty remedy does not apply
if the failure or any resulting damage is caused by (1) components other
than those sold by Viega; (2) not designing, installing, inspecting, testing,
or maintaining the Viega product in accordance with Viega’s installation
and product instructions in e󶈴ect at the time of installation and other
speci󶈵cations and approvals applicable to the installation; (3) improper
handling and protection of the Viega product prior to, during and after
installation, inadequate freeze protection, or exposure to environmental or
operating conditions not recommended for the application; or (4) acts of
nature, such as, but not limited to earthquakes, 󶈵re, or weather damage.
Final approval as to use compatibility to a speci󶈵c process or 󶈶uid
application is the responsibility of the engineer of record or responsible
design/facilities personnel and this Limited Warranty only applies to
manufacturing defects in the Viega Product.