Installation Guide
Table Of Contents
- About this Document
- Disclaimer
- Product Information
- Handling Instructions
- Installation Instructions
- Limited Warranty
- ProPress approved applications
- Minimum distance between press fittings
- ProPress standard jaws clearance requirements
- ProPress standard jaws clearance requirements between tube, wall, and floor
- ProPress compact jaws clearance requirements
- ProPress compact jaws clearance requirements between tube, wall, and floor
- ProPress rings dimensions
- ProPress rings with V1 Actuator clearance requirements
- ProPress rings with V2 Actuator clearance requirements
- ProPress rings with V1 Actuator clearance requirements between tube, wall, and floor
- ProPress rings with V2 Actuator clearance requirements between tube, wall, and floor
- ProPress rings with C1 Actuator clearance requirements between tube, wall, and floor
- ProPress XL-C rings dimensions
- ProPress XL-C rings clearance requirements
- ProPress XL-C rings clearance requirements between tube, wall, and floor
- Minimum distance between existing soldered or brazed fitting and ProPress fitting
- Minimum distance between existing ProPress fitting and soldered or brazed fitting
- Minimum insertion depths for ProPress ½" to 2" fittings
- Insertion depths for ProPress ½" to 2" no-stop couplings
- Insertion depths for ProPress ½" to 2" extended no-stop couplings
- Minimum insertion depths ProPress 2½" to 4" fittings
- Insertion depths for ProPress 2½" to 4" no-stop couplings
Product Information
7 of 44
IM-PP 724607 0320 ProPress
Please read and understand the instructions before beginning installation
to eliminate safety concerns and reduce risks associated with use and
handling of Viega products.
Viega ProPress systems are state-of-the-art press tting systems
that provide economical and reliable installations for the commercial,
industrial, and residential markets.
Viega ProPress are copper and Zero Lead bronze ttings and valves
in copper tube size (CTS) ranging from ½ inch to 4 inches. The ttings
require no soldering or brazing and are installed with electro-hydraulic
press tools (battery-powered or corded press tools).
The ttings feature a green dot representing Smart Connect
®
technology
with an EPDM sealing element suitable for many applications. Viega’s
unique Smart Connect technology helps installers ensure that they have
pressed all connections.
2 Product Information
2.1 ProPress Systems
2.2 Safety
2.2.1 Drinking Water Installation
Standard engineering practices must be observed for planning,
installation, operation, and maintenance of drinking water installations.
Only EPDM sealing elements are approved in drinking water installations.
The use of other sealing elements is not permitted.