Operation Manual

2
DE EN
1. Wichtige Hinweise
Bitte lesen Sie vor der ersten Anwendung des
Produktes bzw. dessen Einbau diese Bedienungs-
anleitung aufmerksam durch und bewahren Sie
sie auf. Sie ist Teil des Produktes.
Sicherheitshinweise
Vorsicht:
Verletzungsgefahr!
Aufgrund der detaillierten Abb. des Originals
bzw. der vorgesehenen Verwendung kann das
Produkt Spitzen, Kanten und abbruchgefähr-
dete Teile aufweisen. Für die Montage sind
Werkzeuge nötig.
Stromschlaggefahr!
Die Anschlussdrähte niemals in eine Steckdo-
se einführen! Verwendetes Versorgungsgerät
(Transformator, Netzteil) regelmäßig auf Schä-
den überprüfen. Bei Schäden am Versorgungs-
gerät dieses keinesfalls benutzen!
Packungsinhalt überprüfen
Kontrollieren Sie nach dem Auspacken den Liefer-
umfang auf Vollständigkeit:
- Signalmodell mit Antriebseinheit,
- ein Befestigungsring,
- eine Tafel mit selbstklebenden Bezeichnungs-
schildern,
- diese Anleitung.
Das Produkt richtig verwenden
Dieses Signal ist bestimmt:
- Zum Einbau in Modelleisenbahnanlagen und
Dioramen.
- Zum Anschluss an einem Modellbahntransfor-
mator (z. B. Art.-Nr. 5200) bzw. an einer
Modellbahnsteuerung mit zugelassener
Betriebsspannung.
- Zum Betrieb in trockenen Räumen.
Jeder darüber hinausgehende Gebrauch gilt als
nicht bestimmungsgemäß. Für daraus resultie-
rende Schäden haftet der Hersteller nicht.
Achtung:
Das Antriebsgehäuse darf nicht geöffnet, be-
schädigt oder mit Feuchtigkeit in Verbindung
gebracht werden. Der Decoder im Zuleitungs-
kabel ist ebenfalls vor Beschädigung und
Feuchtigkeit zu schützen.
1. Important information
Please read this manual completely and attentive-
ly before using the product for the rst time. Keep
this manual. It is part of the product.
Safety information
Caution:
Risk of injury!
Due to the detailed reproduction of the original
and the intended use, this product can have
peaks, edges and breakable parts. For installa-
tion tools are required.
Electrical hazard!
Never put the connecting wires into a power
socket! Regularly examine the transformer for
damage. In case of any damage, do not use
the transformer!
Checking the package contents
Check the contents of the package for complete-
ness after unpacking:
- model of the signal with drive unit,
- one mounting ring,
- a board with self-adhesive labels,
- this manual.
Using the product for its correct
purpose
This product is intended:
- For installation in model railroad layouts and
dioramas.
- For connection to an authorized model
railroad transformer (e. g. item-No. 5200).
- For operation in dry rooms only.
Using the product for any other purpose is not ap-
proved and is considered incorrect. The manufac-
turer is not responsible for any damage resulting
from the improper use of this product.
Caution:
The drive unit in the control box must not be
opened, damaged, or brought in contact with
moisture. Please protect the decoder in the
feeding cable from damage and moisture.