Technical data

5584 069 - 05

Vitocrossal 200, CM2 400, 500, 620 and 620 TX Installation

Boiler

Front Side Panels

Legend

A Clips (included in the accessories package).

The gas train on the burner meets the requirement

of ASME/CSD-1.

1. Cut out the aperture in front side panel either left

or right.

Note: For ease during burner maintenance, route the gas

supply pipe from the opposite side of the burner

hinges (otherwise the panel cannot be removed

when swinging burner left or right). See page 13.

2. Fit two clips A per side panel (included in the

accessory pack).

3. Using the clips hook front side panels C and D into

side panels E and F.

4. Loosely secure front side panels C and D to the top

rails with one screw M6 x 10 per panel.

5. After hooking in the side panels, align supports B

and secure to the side panels with one screw

M6 x 10 each.

Bottom Plate

1. Install bottom plate A between the side panels.

2. Align and secure with screws.