Operating instructions
29
Appendix
Declaration of conformity
We, Viessmann Werke GmbH&CoKG, D35107 Allendorf, declare as sole
responsible body, that the product
Vitoplex100LS
conforms to the following standards:
EN303
EN500821
EN50165
EN55014
EN60335
EN6100032
EN6100033
TRD guideline2003/2
This product is identified in
accordance with the following
directives:
73/23/EEC
89/336/EEC
97/23/EC
This product is certified on the basis
of the EC type test of the heated
pressure vessel (certificate
no.01202620/B04273127404P)
issued by the TÜV Rheinland/
BerlinBrandenburg, 10882Berlin,
as follows:
_0035
Details according to the Pressure Equipment Directive (97/23/EC):
H Heated pressure vessel
H ClassIII/IV in accordance with appendixII, diagram5
H ModulesB and D according to appendixIII
H Applied regulations: TRD
H Materials according to appendixI, 4.2, b) and TRD
H Anti−corrosion supplement according to appendixI, 2.2 and TRD
The pressure device was tested without equipment (safety equipment).
The pressure device must be equipped in accordance with current national
requirements before installation and the initial start−up.
The pressure equipment meets the requirements of current TRD regulations
in their amended form.
Therefore, the following test periods are suggested:
annually: external test
every three years: internal test and/or strength test designed as water
pressure test.
5692729 GB