User Guide

ViewSonic 8 3DV5
1
Turn on your HDTV.
2
Connect the HDMI-in connector (the larger end) of the HDMI cable to the HDTV.
3
Connect the other end of the HDMI cable to your camcorder.
4
Turn on the camcorder.
5
On your HDTV, select the HDMI input port where the HDMI cable is connected.
6
Switch your camcorder to Playback mode and start to play a le. For operation
details please refer to the “Playback” section.
If your HDTV is 2D type, the 3D les output on your HDTV will be 2D “side-by-side” only.
If you want to experience 3D effect on your 2D HDTV, you need to convert the 3D les
into red/cyan format les by installing and using the bundled software (TotalMedia HD
Cam) and copy the converted les into the “DCIM\101DIR2D” folder in the memory card.
Then output the playback to your HDTV and wear the red/cyan glasses to watch it. For
more information please refer to the “Software Addendum” included in the package.
Connecting to HDTV
HDMI
port
1
2
4
3