User Guide

Table Of Contents
10
4. Operation
NOTE: The control button described in this section
is mainly on the remote control unless
specied otherwise.
4.1. Start-up and initial Setting
4.1.1. Welcome
Select your language and tap “Next”.
4.1.2. Ethernet
Tape “Next” button to next page and it will show.
1. Connection Type : DHCP / Static IP
2. IP Address
3. Netmask
4. DNS Address
5. Gateway
You also can tape “Back” to previous page.
4.1.3. Date & Time
Enable “Network-provided time” to sync time
with network and select time zone.
4.1.4. System Mode
Select system to select Normal mode, remove
screen sharing Apps or disable Embedded OS.
4.2. Watch the Connected Video Source
1. Press
INPUT button.
2. Press
or button to select a device, then
press OK button.