User Guide

36
Example2: Set Brightness as 176 for TV-02 and this command is NOT valid Send (Hex Format)
Name Length ID
Command
Type
Command Value1 Value2 Value3 CR
Hex
0x38
0x30
0x32
0x73 0x24 0x31 0x37 0x36 0x0D
Reply (Hex Format)
Name Length ID
Command
Type
CR
Hex
0x34
0x30
0x32
0x2D 0x0D
Set function table:
Basic function
Set Function Length ID Command Command Value Range Comments
Type
(ASCII)
Code
(ASCII)
Code
(Hex)
(Three ASCII
bytes)
Power on
*3.2.1
/o󰀨(standby)
8 s ! 21 000: STBY
001: ON
1. The Power-on via LAN
control may works only un-
der specic mode. To see
display UG for details.
*3.1.1
2. “WOL by MAC address”
may available as alterna-
tive.
*3.2.1
Input Select 8 s “ 22 000: TV
001: AV
002: S-Video
003: YPbPr
004: HDMI1
014: HDMI2
024: HDMI3
034: HDMI4
005: DVI
006: VGA1
016: VGA2
026: VGA3
007: Slot-in PC
(OPS/SDM)/HDBT
008: Internal mem-
ory
009: DP/Type-C
00A: Embedded/
Main (Android)
1. No need for USB
2. For the case of two more
same sources, the 2
nd
digi-
tal is used to indicate the
extension.
3. The HEX of 00A is 30 30
41.