User Guide

26
Monitor information
Shows information about your display, including
model number, serial number, operating hours and
software version.
DP version
DisplayPort support mode.
The options are:
• {DP 1.1}: DP 1.1 single stream (clone
mode).
• {DP 1.2 SST}: DP 1.2 Single stream (clone
mode).
• {DP 1.2 MST}: DP 1.2 Multi-Stream
NOTE: The DP version must be set the same for
all daisy chain displays.
Window selection
Select the window for adjusting setting. The
selected window will be highlight green border.
Window selection will set to Main after power on.
The options are: {Main}, {PIP}
Rotation
Set the rotation of Main/Sub/OSD
Language
Select the language used in the OSD menu.
The options are: {English}/{Deutsch}/{
简体中
文
}/{Français}/{Italiano}/{Español}/{Pyccкий}/
{Polski}/{Türkçe}/{
繁體中文
}
QR Code
Display QR code of Viewsonic website for more
information.
Conguration2reset
Reset all settings in Conguration2 menu to the
factory preset values.
5.1.7. Advanced menu
Input resolution
IR control
Keyboard control
Tiling
Off timer
Date and time
Schedule
HDMI with One Wire
Auto signal detection
Power save
Configuration 2
Advanced option
Auto
Action
Action
Action
Off
Action
Action
Off
Action
Mode 1
Input resolution
Set the resolution of the VGA input. This is only
required when the display is unable to detect the
VGA input resolution correctly.
NOTE: This item is functional for VGA input only.
The options are:
• {1024x768 / 1280x768 / 1360x768 /
1366x768}
• {1400x1050 / 1680x1050}
• {1600x1200 / 1920x1200}
• {Auto}: Determines the resolution
automatically.
The selected settings will become effective after
turning off the power and turning it on again.
IR control
Select the operation mode of the remote control
when multiple displays are connected via an
RS232C connection.
• {Normal} - All displays can be operated
normally by the remote control unit.
• {Primary} - Designate this display as the
primary display for remote control operation.
Only this display can be operated by the
remote control. (In primary mode, IR key will
always be processed regardless the monitor
id).
• {Secondary} - Designate this display as the
secondary display. This display can not be
operated by the remote control, and will only
receive the control signal from the primary
display via the RS232C connection.
• {Lock All} / {Lock all but Volume} / {Lock
all but Power}/{Lock all except PWR &
VOL} - Lock the remote control function of
this display.
NOTE: To unlock IR control, press and hold the
[Info] button on the remote control for more 6 (six)
seconds.
Keyboard control
Choose to enable or disable the display keyboard
(control buttons) function.
• {Unlock} - Enable the keyboard function.
• {Lock All} / {Lock all but Volume} / {Lock
all but Power}/{Lock all except PWR &
VOL} - Disable the keyboard function.
NOTE:
“Keyboard Control Lock Mode” This function
completely disables the access to all Keyboard
Control functions. To enable or disable the
keyboard control lock, press both [VOL+]and [UP]
buttons and hold down continuously for more than
3 (three) seconds.
Tiling
With this function you can create a single large-
screen matrix (video wall) that consists of up
to 225 sets of this display (up to 15-sets on the
vertical and 15-sets on the horizontal sides). This
function requires a daisy-chain connection.