Digital Photo Frame Quick Start Guide

13
Caution: During the startup setup, if you set the system to automatically play images, audio files,
video files, or audio files + video files, ensure that the files are stored in a directory of less than three layers.
If the directory is too deep, the system will fail to locate and play the files.
Connecting to USB Disk
Use the attached USB cable to connect to USB disks (USB Host mode) such as a USB disk
or USB MP3 player. After the USB device is identified, the USB icon in the card selection
interface will be highlighted and a device
named “UDISK” will appear in the file list.
y Turn on the power.
y Connect the USB disk to the digital photo
frame through the USB cable.
y In the card selection interface, select
the USB icon to access the USB disk and
operate it as a memory card.
Connecting to PC
Use the attached USB cable to connect the
product to a PC (USB Slave mode). Then
you can manage the memory card/memory
in the digital photo frame through the PC.
y Turn on the power.
y Connect the product to the PC through
the USB cable.
y After the PC automatically identifies the
device and installs the driver, you can
operate the device through the PC.
Connecting to External Devices
EN