User Guide
Table Of Contents
- Veiligheidsvoorzorgen
- Inleiding
- Aansluitingen maken
- Uw ViewBoard gebruiken
- Uw ViewBoard aan-/uitschakelen
- Initiële start-instellingen
- vLauncher - Welkomscherm op maat te maken
- Werkbalk
- ViewBoard On-Screen Display (OSD) Menu
- General Setting (Algemene instellingen)
- Audio Settings (Audio-instellingen)
- Screen Settings (Scherminstellingen)
- Display Settings (Weergave-instellingen)
- Adjust Settings (Instellingen bijstellen)
- Advanced Settings (Geavanceerde instellingen)
- Wireless & Networks (Draadloos & netwerken)
- Device (Apparaat)
- Personal (Persoonlijk)
- Ingebedde toepassingen en instellingen
- RS-232 Protocol
- Appendix
- Reglementaire en veiligheidsinformatie
102
Set-funcelijst
De PC kan de LFD ondervragen voor specieke aces. Het formaat van het
Get-funcepakket bestaat uit 9 bytes wat gelijk is aan de structuur van het
Seuncepakket. Merk op dat de "Waarde"-byte aljd = 000.
Geuncebeschrijving:
Lengte:
Totale Byte van de boodschap zonder "CR".
TV/DS ID
Identificatie voor elke TV/DS (01~98; default is 01)
Commandotype
Identificeer het commandotype,
“g” (0x67h) : Getcommando
“r” (0x72h) : Geldig commando-antwoord
“-“ (0x2Dh) : Ongeldig commando-antwoord
Commando:
Functie commandocode: Een byte ASCII-code.
Waarde[1~3]:
Drie bytes ASCII die de waarde definiëren.
CR
0x0D
Get-funce formaat
Zend: (Commandotype=“g”)
Naam Lengte ID Commandotype Comman-
do
Value1 Value2 Value3 CR
Byte-
telling
1 Byte 2
Byte
1 Byte 1 Byte 1 Byte 1 Byte 1 Byte 1
Byte
Volgorde
van bytes
1 2~3 4 5 6 7 8 9
Antwoord: (Commandotype=“r” of “-”)
Als het commando geldig is, is het commandotype = "r"
Naam Lengte ID Commandotype Comman-
do
Value1 Value2 Value3 CR
Byte-
telling
1 Byte 2
Byte
1 Byte 1 Byte 1 Byte 1 Byte 1 Byte 1
Byte
Volgorde
van bytes
1 2~3 4 5 6 7 8 9
Als het commando NIET geldig is, is het commandotype = "-"
Naam Lengte ID Commandotype CR
Byte-telling 1 Byte 2 Byte 1 Byte 1 Byte
Volgorde van bytes 1 2~3 4 5