User Guide
Table Of Contents
- Key safety instructions
- Introduction
- Projector Positioning
- Connection
- Operation
- Activate the projector
- Using the menus
- Use basic settings
- Use Network setting
- Use Advanced settings
- Use Information
- Use Firmware upgrade
- Use Image settings
- Use Advanced settings (in signal source mode)
- Switching input signal
- Changing HDMI input settings
- Adjusting the projected image
- Perform keystone correction
- Using the CEC function
- Smart energy-saving
- Light Source Mode
- Operations at high altitudes
- Hiding the image
- Optimize images in user mode
- Fine-tuning of image quality in user modes
- Adjust Gamma
- Color Management
- Fine-tuning of image in user modes
- Select the aspect ratio
- About the aspect ratio
- Control the projector with the web browser
- About Crestron e-Control®
- Using the projector under standby mode
- Switch off the projector
- Menu operations
- Maintenance
- Troubleshooting
- Specifications
- Copyright information
- Appendix
6
Device control and functions
Projector
6
1
2
4
3
75 8
7
6
9
1.
Turn the projector power on or off.
2. (Power LED indicator)
Please refer to “LED Indicator”.
3. (TEMP LED indicator)
Please refer to “LED Indicator”.
4. (LAMP LED indicator)
Please refer to “LED Indicator”.
5. Menu/Exit
Menu: Displays or exits the on-screen display menu.
Exit: Returns to the previous OSD menu, exits and saves the menu settings.
6.
/
Left/
Right (direction buttons): Selects the required menu item to make
adjustments.
: Adjusts the projector’s sound level.
7.
/
Up/
Down (direction buttons): Selects the required menu item to make
adjustments.
/ (Keystone button): Manually corrects distorted images resulting from an angled
projection.
8. Source
A source selection bar displays.
9. Enter
Enter the selected on-screen display (OSD) menu item.