User Guide
Table Of Contents
- Key safety instructions
- Introduction
- Projector Positioning
- Connection
- Operation
- Activate the projector
- Using the menus
- Use basic settings
- Use Network setting
- Use Advanced settings
- Use Information
- Use Firmware upgrade
- Use Image settings
- Use Advanced settings (in signal source mode)
- Switching input signal
- Changing HDMI input settings
- Adjusting the projected image
- Perform keystone correction
- Using the CEC function
- Smart energy-saving
- Light Source Mode
- Operations at high altitudes
- Hiding the image
- Optimize images in user mode
- Fine-tuning of image quality in user modes
- Adjust Gamma
- Color Management
- Fine-tuning of image in user modes
- Select the aspect ratio
- About the aspect ratio
- Control the projector with the web browser
- About Crestron e-Control®
- Using the projector under standby mode
- Switch off the projector
- Menu operations
- Maintenance
- Troubleshooting
- Specifications
- Copyright information
- Appendix
23
Use Firmware upgrade
Users can update the firmware by USB, and check the version.
1. Press [Setting] on the remote control and enter the menu. Then press /
and select “Software Upgrade ” then press [Enter].
The Firmware update process requires for downloading and copying BIN file to root directory of USB,
and then insert it into projector.
2.
Once Software Upgrade selected, then a warning message will be displayed on screen.
3. After selecting Yes, update process is starting and a progress bar is indicated accordingly.
4. Projector will restart automatically once progress bar reaches 100%.
After projector restarted automatically, and language options appeared, then you need to
manually restart projector again to complete the update procedure.
5.
Firmware Update
Software Upgrade
Software Update By USB
Firmware Version
0037
Version
Firmware Update
Software Upgrade
Software Update By USB
Firmware Version
0037
Version
WARNING
Yes Cancel
Do you want to update the latest firmware?