User Guide

38
3D functions
This projector also comes with 3D functions that offer greater depth and immersion
when viewing 3D movies, videos, sports, and games. You will need a pair of 3D
glasses when viewing 3D images and videos.
If the 3D signal comes from an HDMI 1.4a compatible device, this projector will look
for a 3D Sync data signal. Once detected, the projector will automatically switch to
3D projection. Under other circumstances, you may need to manually select the 3D
Sync format to ensure the proper projection of 3D images.
Selecting 3D Sync formats:
1. Connect the signal source and use the remote control or control panel to open the
menu. Select the Advanced > 3D Settings menu.
2. Press [Enter] to bring up the 3D Settings page.
Once 3D Sync function has been activated:
Brightness of the projected image will be reduced.
Color modes cannot be adjusted.
Zoom functions can only enlarge the image to a limited degree.
If the 3D image has been severely inverted, you may set the 3D Sync Invert function to [Invert]
to correct this problem.
The 3D mode supports the following formats:
Timing Frame Sequential Top-Bottom Side-by-Side
1024x768@60Hz V V V
1280x720@60Hz V V V
1280 x 800 @ 60Hz V V V
1280 x 1024 @ 60Hz V V V
1366 x 768 @ 60Hz V V V
1440 x 900 @ 60Hz V V V
1600 x 1200 @ 60Hz V V V
1920 x 1080 @ 60Hz V V V