User Guide
Table Of Contents
- Key safety instructions
- Introduction
- Projector Positioning
- Connection
- Operation
- Activate the projector
- Using the menus
- Use basic settings
- Use Network setting
- Use Advanced settings
- Use Information
- Use Firmware upgrade
- Use Image settings
- Use Advanced settings (in signal source mode)
- Switching input signal
- Changing HDMI input settings
- Adjusting the projected image
- Perform keystone correction
- Using the CEC function
- Smart energy-saving
- Light Source Mode
- Operations at high altitudes
- Hiding the image
- Optimize images in user mode
- Fine-tuning of image quality in user modes
- Adjust Gamma
- Color Management
- Fine-tuning of image in user modes
- Select the aspect ratio
- About the aspect ratio
- Control the projector with the web browser
- About Crestron e-Control®
- Using the projector under standby mode
- Switch off the projector
- Menu operations
- Maintenance
- Troubleshooting
- Specifications
- Copyright information
- Appendix
52
Functions Description
6. Image Setting
Color Mode
Please refer to “Selecting a picture mode” for the
details.
Brightness Please refer to “Adjusting Brightness” for the details.
Contrast Please refer to “Adjusting Contrast” for the details.
Color Temp
Please refer to “Selecting a Color Temperature” for the
details.
Tint Please refer to “Adjusting Tint” for the details.
Saturation Please refer to “Adjust Saturation” for the details.
Sharpness Please refer to “Adjusting Sharpness” for the details.
Gamma Please refer to “Adjust Gamma” for the details.
Brilliant Color Please refer to “Adjusting Brilliant Color” for the details.
Noise Reduction Please refer to “Reducing image noise” for the details.
Color Management Please refer to “Color Management” for the details.
Digital Zoom Please refer to “Adjusting Digital zoom” for the details.
Position Please refer to “Adjusting Position” for the details.
Phase Please refer to “Adjusting Phase” for the details.
H. Size
Please refer to the “Adjusting Horizontal size” for the
details.
Overscan Please refer to “Adjusting Overscan” for the details.
Reset Current Color
Settings
Restore all the color settings to the factory defaults.
7. Advanced
Aspect Ratio Please refer to “Select the aspect ratio” for the details.
HDR
The projector supports HDR imaging. The dynamic
ranges of the signal sources for the HDMI1 and HDMI2
ports can be automatically detected, and the settings
can be optimized to display the contents with various
light source conditions.
EOTF
The image brightness levels can be automatically
adjusted according to the input source. The manual
selection option is also available to adjust the
brightness level and show an image of better quality.
The function is not available when SDR is selected
in the HDR menu.
Frame Interpolation
Smooth image quality of an object moving at high
speed. Especially suitable for users who like fast-paced
sport events.
HDMI Setting
Please refer to “Changing HDMI input settings” for the
details.
3D Settings Please refer to the “3D functions” for the details.
Information
Source
Resolution
3D Format
HDR