User Guide
Table Of Contents
- Key safety instructions
- Introduction
- Projector Positioning
- Connection
- Operation
- Activate the projector
- Using the menus
- Use basic settings
- Use Network setting
- Use Advanced settings
- Use Information
- Use Firmware upgrade
- Use Image settings
- Use Advanced settings (in signal source mode)
- Switching input signal
- Changing HDMI input settings
- Adjusting the projected image
- Perform keystone correction
- Using the CEC function
- Smart energy-saving
- Light Source Mode
- Operations at high altitudes
- Hiding the image
- Optimize images in user mode
- Fine-tuning of image quality in user modes
- Adjust Gamma
- Color Management
- Fine-tuning of image in user modes
- Select the aspect ratio
- About the aspect ratio
- Control the projector with the web browser
- About Crestron e-ControlĀ®
- Using the projector under standby mode
- Switch off the projector
- Menu operations
- Maintenance
- Troubleshooting
- Specifications
- Copyright information
- Appendix
54
LED Indicator
Projector status Power indicator Temp indicator Lamp indicator
Stand-by mode Green Flashing Off Off
Normally on Green Off Off
Normal Operations Green Off Off
Temperature Error
1
Green Red Flashing Orange
Temperature Error
2
Green Red Flashing Off
Fan Error 1 Green Red Flashing Green
Fan Error 2 Green Red Flashing Green Flashing
Fan Error 3 or 4 Green Red Flashing Orange Flashing
Color Wheel Error Green Off Orange
Light bulb
abnormal
Green Off Red
Heat dissipation
state
Green Green Flashing Off