User guide

ENGLISH
9
ViewSonic N2630w/N3230w/N3730w
Installing the LCD TV
Remove the Stand
If you prefer to mount your new ViewSonic TV on a wall instead of attaching it to the stand. Please
referencethe instructions included in the wall mounting kit (not included).
IMPORTANT: Disconnect the Stand from the TV with the bottom foam packaging material still attached.
Read all instructions before dismantling the stand.
A) Lift foam packaging material from the TV box.
B) Remove the top foam and bottom foam of the TV set.
PICTURE-1 (26” 32”)
PICTURE-2 (37”)
C) Remove the protective bag from the LCD unit, but DO NOT remove the bottom foam packaging
material.
D) Locate the place on the front of the TV to take off the stand and enscrew four screws between the
stand and the TV set, and then remove the stand from it .
PICTURE-3 (26” 32” 37”)