User Guide

ConguringClientSettings

Conguring Network Settings

4.5.9 Establishing and Stopping a Wireless Connection

The Wireless setting enables you to establish/stop a wireless connection for your SC-T35 thin client.

NOTE

• Before you can access available wireless networks, you need to install an external

and USB-based wireless network adapter. Ensure that you have set up the required

wireless network adapter.

• Your package may not include a wireless network adapter (optional). Please contact

your dealer for compatible adapters if needed. It’s recommended to check with your

dealer rst if you plan to purchase one by yourself.

• The Wireless setting also allows you to congure and manage wireless network

settings. For details on how to congure and manage wireless network settings,

please refer to section “4.5.9 Conguring Wireless Network Settings” on page 94.

Establishing a Wireless Network Connection

To establish a wireless network connection for your SC-T35 thin client, please do the following:

1. On ViewSonic Client Setup, click Network > Wireless to open the Wireless Network list.

NOTE

• Your SC-T35 will perform network discovery once and specify all available wireless

networks. To refresh, click Scan on the top of the Wireless Network list.

2. Click to check the desired wireless network. The Connect button then appears on the top of the

Wireless Network list.