User Guide

ConguringClientSettings
Conguring Service Access Settings
121
RD Gateway Sub-tab
Connection Settings
Item Description
Use RD Gateway server
Check/Uncheck to enable/disable the use of an RD Gateway server. When
checked, the following two items in this table appear.
Server Name
Type the name of the RD Gateway server. Ask the network administrator for
this information.
Use my Remote Desktop
credentials for the RD Gateway
Check to use the same set of credentials for authenticating to both the Remote
Desktop computer and the RD Gateway server.
Bypass RD Gateway for
local address
Checktopreventtrafctoandfromlocalnetworkaddressesfrombeingrouted
through the RD Gateway server. This could make your RDP connection faster.
Settings for the Connection Type of Remote Web Access
NOTE
• For descriptions of settings for the connection type of Remote Desktop, please refer
to “Settings for the Connection Type of Remote Desktop” on page 114.
• For descriptions of settings for the connection type of Web Feed, please refer to
“Settings for the Connection Type of Web Feed” on page 124.
General Sub-tab
Server Settings
Item Description
Session Name Type in the name for Remote Web Access sessions.
Connection URL Type in the URL of the server where to deliver Remote Web Access sessions.
Connection Type
This table only provides descriptions for available settings when Remote
Web Access is selected.
Three connection types are available:
Option Description
Remote Desktop Select to access remote desktop/application services.
Remote Web Access
Select to access remote application services through
a Web browser (Mozilla Firefox).
Web Feed
Select to access remote application services through
published desktop shortcuts.