User Guide

ConguringClientSettings
Conguring System Settings
43
4.2.7 Enabling or Disabling the Appliance Mode
The Appliance mode allows your SC-T35 to start up directly with the desired Microsoft Remote Desktop, Citrix ICA,
VMware View or Horizon View session. Under the Appliance mode, users will feel as if they were using a standalone
desktop computer; the underlying client operating system, ViewSonic ARM Linux, is hidden from the very
beginning.
NOTE
• There are three similar but dierent modes for your SC-T35 and only one mode
will take eect if all are enabled. Three modes and the order of priority are
listed as follows:
No. Mode Description
1 Appliance
The client will start up directly with the desired
RDP / ICA / View session and turn off after
existing the session.
Available actions include:
• Re-launching a new session
• Restarting the thin client
• Turning off the thin client
2 Autostart
The client will start up directly with the desired
RDP / ICA / View session and perform the
conguredactionafterexistingthesession.
Available actions include:
• Returning to the local desktop
• Re-launching a new session
• Restarting the thin client
• Turning off the thin client
3 Quick Connection
The default. The client will enter ViewSonic
Quick Connection screen after system startup.
• For more information on these modes, please refer to sections:
 section 4.2.8 on page 47 and section 3.1 on page 14 (Quick Connection
mode)
 section 4.2.7 on page 43 (Appliance mode)
 section 4.6.5 on page 114 (Autostart mode for RDP sessions)
 section 4.6.8 on page 148 (Autostart mode for ICA sessions)
 section 4.6.11 on page 175 (Autostart mode for View sessions)