User Guide

ConguringClientSettings

Conguring System Settings

Enabling the Appliance Mode

To enable the Appliance mode, please do the following:

NOTE

• Ensure that you have congured the connection settings for the desired Microsoft

Remote Desktop, Citrix ICA, VMware View or Horizon View session under

Applications tab. You need to specify which service type and connection settings

entry will be used under the Appliance mode. For detailed instructions, please see

sections:

 “4.6.3 Conguring Basic RDP Connection Settings” on page 99

 “4.6.6 Conguring Basic ICA Connection Settings” on page 128

 “4.6.9 Conguring Basic VMware View Connection Settings” on page 171

NOTE

• Please note that the Autostart mode also enables the client to start up directly with

an RDP / ICA / View session and provides more conguration exibility than the

Appliance mode. For detailed information on the Autostart mode, please refer to

the following sections:

 “4.6.5 Conguring Advanced RDP Connection Settings” on page 114

 “4.6.8 Conguring Advanced ICA Connection Settings” on page 148

 “4.6.11 Conguring Advanced View Connection Settings” on page 175

1. On ViewSonic Client Setup, click System > Appliance Mode.

2. Click to check Enable Appliance Mode.