User Guide

ConguringClientSettings
Conguring User Interface Settings
67
4.3.8 Conguring Screensaver Settings
To congure screensaver settings for your SC-T35, please do the following:
1. On ViewSonic Client Setup, click User Interface > Screensaver.
2. Click drop-down menus or tick/untick checkboxes to choose desired settings.
Screensaver
Item Description
Enable Screensaver Check/Uncheck to enable/disable Screensaver.
Display Mode
Click to select the display mode of the screensaver. Two options are available:
Blank and Logo.
Option Description
Blank Displays a black screen.
Logo DisplaystheViewSonicoatinglogo.
Display After (minute) Click to select the wait time for screensaver.
Enable Display Sleep Mode
Check to turn off (i.e. stop sending signals to) the display to maximize the
energy savings.
Enter Display Sleep Mode after
Screensaver (minute)
Click to select when to turn off (i.e. stop sending signals to) the display after
Screensaver starts.
On Resume, Password Protect Check/Uncheck to resume with/without a password.
TIP
• While setting wait time for screensaver, you can hang your mouse over the Up/
Down arrow to quickly scroll up/down the Minute list.
3. Click Save to apply.