User Guide

ConguringClientSettings

Conguring Network Settings

4.5.3 Conguring Wired Network Settings

The Ethernet setting enables you to congure the wired network settings for your SC-T35 thin client.

Using a Dynamic IP Address

To use a dynamic IP address, please do the following:

1. On ViewSonic Client Setup, click Network > Ethernet.

2. Under the IP address section, click the drop-down menu to select DHCP for the IP type eld.

NOTE

• If DHCP is selected, the DHCP server over the network will automatically assign

an IP address to your SC-T35 thin client. This is the default setting.

3. Click Save to apply.

Using a Static IP Address

To use a static IP address, please do the following:

NOTE

• It’s recommended to use a dynamic IP address for your SC-T35 thin client in a

corporate network environment.

1. On ViewSonic Client Setup, click Network > Ethernet.

2. Under the IP address section, click the drop-down menu to select Static IP for the IP type eld.

3. The IP address, Subnet mask, and Gateway elds appear in the IP address section.