User Guide

ConguringClientSettings

Conguring Network Settings

4.5.5 Conguring Virtual Private Network Settings

Adjusting Connection settings for a Virtual Private Network

To adjust connection settings for a virtual private network, please do the following:

1. On ViewSonic Client Setup, click Network > VPN to open the Virtual Private Network list.

2. Click to check the desired virtual private network. The Edit

button appears on the top of the

Virtual Private Network list.

3. Click Edit to adjust the settings, and then click Save to apply.

Conguring General Settings for Virtual Private Network Connections

To congure general settings for virtual private network connections, please do the following:

1. On ViewSonic Client Setup, click Network > VPN, and then click Settings sub-tab.

2. Under the Connection section, click to check/uncheck Auto connect when startup to allow/disallow

automatic virtual private network connection after system startup. When this feature is enabled, select the

desired virtual private network through the drop-down menu.