User Guide

Connecting to HDMI devices

Use an HDMI cable to establish a connection between the projector and HDMI device.

1. Connect one end of the HDMI cable to the HDMI output jack on the video device.

2. Connect the other end of the cable to the HDMI signal input jack on the projector.

In the unlikely event that the projector is connected to a DVD player via the projector’s HDMI

input and the projected picture displays wrong colors, please change the color space to YUV.

See “Changing HDMI input settings” for details.

Note: The PA501S has no HDMI interface

To connect the projector to a Component Video source

device:

Examine your Video source device to determine if a set of unused Component Video

output sockets is available:

• If so, you can continue with this procedure.

• If not, you will need to reassess which method to use to connect to the device.

1. Take a VGA (D-Sub) Component adapter cable and connect the end with 3 RCA

type connectors to the Component Video output sockets of the Video source device.

Match the color of the plugs to the color of the sockets; green to green, blue to blue,

and red to red.

2. Connect the end of the VGA (D-Sub) Component adapter cable (with the D-Sub type

connector) to the COMPUTER jack on the projector.

If the selected video image is not displayed after the projector is turned on and the correct

video source has been selected, check that the Video source device is turned on and operating

correctly. You must also check that the signal cables have been connected correctly.