User Guide

Fine-tuning of image quality in user modes

types. You can make adjustments to these functions based on your needs.

Adjusting Brightness

Enter Image > Brightness menu and then press

/.

The higher the value, the brighter the image. And

lower the setting, darker the image.

Adjusting this control allows the black area of the image to appear just as black to

reveal details within.

Adjusting Contrast

Enter Image > Contrast menu and then press /.

The higher the value, the greater the contrast. After

adjusting Contrast, this function may be used to set the peak-white level that

matches the input signal and observed environment of your choice.

Adjusting Color

Enter Image > Advanced > Color menu and press /.

Lower settings produce less color saturation. If the setting is too high, colors on the

image will be overpowering, which makes the image unrealistic.

This function is only available when the input signals are Video, YPbPr or YCbCr

Adjusting Tint

Enter Image > Advanced > Tint menu and press /.

The higher the value, the more reddish the picture becomes. The lower the value, the

more greenish the picture becomes.

This function is only available when the input signal is Video.

Adjusting Sharpness

Enter Image > Advanced > Sharpness menu and then press /.

Higher settings produce sharper images. The lower the value, the softer the picture

becomes.

This function is only available when the input signals are Video, YPbPr or YCbCr.