User Guide

41
Description of each menu
Function Description
1. Display menu
Screen Color See “Using Screen Color” for details.
Aspect Ratio See “Selecting the aspect ratio” for details.
Keystone See “Perform keystone correction” for details.
Position
Displays the position adjustment page. To move the
projected image, use the directional arrow keys. The
values shown on the lower position of the page change
with every key press you made until they reach their
maximum or minimum.
This function is only available when a PC input signal is
selected.
The adjustment range may vary under different timings.
Phase
Adjusts the clock phase to reduce image distortion.
This function is only available when a PC input signal is
selected.
H. Size
Adjusts the horizontal width of the image.
This function is only available when a PC input signal is
selected.
Digital Zoom Zoom in or out picture.
OverScan
To avoid the appearance of the distorted image at the
edge of the screen, use over-scanning technology
to expand the image by 5% or even 10%, and the
distorted image extends to the place outside the
screen; only the middle part with better linearity is
shown.
3X Fast Input
Selecting On enables the function. This feature helps
reduce the frame rate. Enabling quick response
in local timing. The following settings will return to
factory defaults when enabled: aspect ratio, keystone
correction, position, zoom, over scan. This function is
only available if the optimum resolution input signal is
selected.
2. Image menu
Color mode See “Selecting a picture mode” for details.
Brightness See “Adjusting Brightness” for details.
Contrast See “Adjusting Contrast” for details.
Color Temperature
For more details, please refer to “Selecting a
Color Temperature” and “Setting a preferred color
temperature”.