User Guide

43
Function Description
4. Basic menu
Presentation Timer See “Setting the Presentation Timer” for details.
Pattern
The projector can display several test patterns. It helps
you adjust the image size and focus and check that the
projected image is free from distortion.
Blank Timer See “Hiding the image” for details.
Message
Selecting On displays the current information on the
screen when the projector is detecting or searching for
a signal.
Splash Screen
Allows you to select which logo screen will be displayed
during projector start-up.
5. Advanced menu
3D settings See “3D functions” for details.
HDMI settings See “Changing HDMI input settings” for details.
Lamp Settings See “Lamp Settings” for details.
Filter settings
After the projector is installed with the optional lter
cover, use this function to activate the lter mode.
DCR
Enables or disables the DCR (Dynamic Contrast Ratio)
function. Selecting On enables the function and the
projector will automatically switch the Lamp mode
between normal and economic modes according to the
input image detected.
This function is only available when a PC input signal is
selected.
After enabling DCR, frequent Lamp mode switching may
shorten Lamp life and noise level will vary during
operation.
Closed Caption
Selects a preferred closed captioning mode when the
selected input signal carries closed captions.
● Captions: An on-screen display of the dialogue,
narration, and sound effects of TV programs and
videos that are closed captioned (usually marked as
“CC” in TV listings).
This function is only available when a Composite video
input signal is selected and its system format is NTSC.
Caption Version
To view captions, select CC1, CC2, CC3, or CC4 (CC1
displays captions in the primary language in your area).
Reset settings
Returns all settings to the factory preset values.
The following settings will still remain: Keystone,
Language, Projector Position, High Altitude Mode,
Security Settings, and Remote Control Code.