User Guide

OSD Menu
1514
4.3 OSD Notice
idling:
The OSD menu will close and return to the original processed OSD menu
after the OSD time out value expired.
No signal:
• There is no HDMI connection.
• The connected HDMI source and your smart display is not active. Make
sure the HDMI source is not in O󰀨, Standby, Hibernate or Sleep mode.
4.4 OSD and Hot keys setting
OSD Lock: Press and hold the OSD menu [ ] and the up arrow [▲] for 10
seconds to set. If any buttons are pressed, the message OSD Locked will
display for 3 seconds.
OSD Unlock: Press and hold [
] and the up arrow [▲] again for 10
seconds to unlock.
Power Button Lock: Press and hold [
] and the down arrow [▼] for 10
seconds to set. If the power button is pressed, the message Power Button
Locked will display for 3 seconds. With or without this setting, after a power
failure, your LCD display’s power will automatically turn ON when power is
restored.
Power Button Unlock: Press and hold [
] and the down arrow [▼] again
for 10 seconds to unlock.
DDC/CI enable/disable: Press [
] and [▼] keys at the same time to toggle
SSC/CI and DDC/2B (DDC/CI enable/disable) to allow the computer to send
specific Monitor Control Command Set (MCCS) to command the devices, as
well as receive sensor data from the devices, over a bidirectional link.