Manual

WMK-005
Installation Manual Page 9
3. Separate the upper assembly from the projector mounting bracket by slightly loosening the two
tension knurl knobs to create free play between the bracket tri-lock assembly and the upper section
tri-lock assembly points (Figure 2A and Figure 2B).
4. Loosen the security screw knurl knob far enough to allow the two parts to be rotated 180° apart and
separate (Figure 2C).
Figure 2. Mount Preparation
A
B
C
Tension
Knobs
Upper
Assembly
Safety
Knob
Tri-Lock
Opening
Rotate 180°
To unlock