VZ-LED SERIES 21.5" 3G-SDI BROADCAST MONITOR USER MANUAL EDITION : May 2019 Please read this manual thoroughly before use, and keep it handy for future reference.
CONTENTS Safety Instruction ....................................................................................................................................................................................... 3 1. Important Safety Instruction Installation ....................................................................................................................................................... 3 ...............................................................................................
SAFETY INSTRUCTION Important Safety Instruction 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. Read all warnings. Follow all instructions to ensure longevity of monitor. Do not place the monitor near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers,stoves, or other heat generating devices.
INSTALLATION Installation Tools The following tools may be required depending on your installation. Electronic Stud Finder Pencil Protective Eye-wear Level Phillips Screwdriver Assembly Components - provided Your ViewZ monitor is shipped with all proper installation hardware and components. If there are parts missing and/or damaged, please stop the installation and contact ViewZ USA at (888)-998-4399.
CONNECT EXTERNAL EQUIPMENTS Interface Input Ports q 1. 2. 3. 4. 3G-SDI IN / OUT USB (Upgrade only) HDMI IN VGA User Manual w e r t 5. 6. 7. 8. y u i YPbPr IN AUDIO IN AUDIO OUT DC 12V IN Visit the ViewZ USA website at https://www.viewzusa.
CONTROL AND FUNCTION Monitor Button Function q w e 1. Source Select an input source 2. Menu Enter the MENU, save the adjustment of sub-menu and exit the OSD 3. Left & Right ◄ ► Change the value on selected menu 4. Exit Exit the MENU or go back previous MENU selection 6 r t y u 5. FN User definable button. Default function is 'Waveform' 6. Power Monitor power on / off 7. LED Indicator Blue color: monitor on Red color : monitor off Visit the ViewZ USA website at https://www.viewzusa.
CONTROL AND FUNCTION Monitor Button Function Shortcut key: F1 user-definable function button 1. Select "MEMU / SYSTEM / F1 Configuration" to custom F1 shortcut setting. Then press ◄ ► button to choose options. 2. Press "MENU" to confirm option as default, then press EXIT to exit. Function of F1 button can also be customized: Level Meter, Center Marker, Aspect Marker, Check Filed, Underscan, Scan, Aspect, Freeze. Default function: Level Meter ◄ ►Buttons Operation 1.
CONTROL AND FUNCTION Picture FUNCTION VALUE Brightness Setup the brightness 0 ~ 100 Contrast Setup the contrast 0 ~ 100 Tint Setup the tint 0 ~ 100 Sharpness Setup the sharpness 0 ~ 100 Color Temperature Setup the color temperature Red Gain Setup the Red contrast(gain) level 0 ~ 255 Green Gain1) Setup the Green contrast(gain) level 0 ~ 255 Blue Gain Setup the Blue contrast(gain) level 0 ~ 255 Setup the Red brightness(offset) level 0 ~ 511 Green Offset Setup the Green brightness(o
CONTROL AND FUNCTION Function FUNCTION VALUE Scan Change the scan mod Aspect, Pixel to Pixel, Zoom Aspect Setup the display ratio Full, 1.85:1, 2.35:1, 4:3, 3:2 Display Scan Display the scan mode Fullscan, Overscan, Underscan Check Field Setup the display color Off, Mono, Red, Green, Blue Zoom Display the original image resolution ×1.
CONTROL AND FUNCTION Audio FUNCTION VALUE Volume Adjust volume on monitor 0 ~ 100 Level Meter Turn on/off the embedded audio OFF, ON Audio Channel Setup the embedded audio channel for Ch 0 / Ch 1, Ch 2 / Ch 3, Ch 4 & Ch 5 internal speaker or Audio OUT Ch 6 / Ch 7, Ch 8 / Ch 9, Ch 10 & Ch 11 Ch 12 / Ch 13, Ch 14 / Ch 15 Audio level meter & channel only available in SDI input System FUNCTION 10 VALUE Language Set the language of the OSD menu English, Chinese OSD Timer Set the OSD display
SPECIFICATION Model No. Display VZ-215LED-L1 Panel Type 21.5'' LED Backlit Monitor Pixel Pitch 0.24825 (H) x 0.24825 (V) mm Brightness 250 cd/m² Contrast Ratio 1000 : 1(Typ.) Viewing Angle R/L : 85°/ 85° U/D : 80°/ 80° Color Depth 16.7 Million Colors Response Time < 25 ms Max. Resolution 1920 (H) x 1080 (V) @60Hz Aspect Ratio 16 : 9 Audio Speaker 2 x 2W Dimension & Weight Weight 8.4 lbs ( 3.
SPECIFICATION Model No. VZ-215LED-L1 SMPTE 425M - A&B (YCbCr 4:2:2) SMPTE 274M (YCbCr 4:2:2) SDI Input Signal Format ANALOG 1080i (60/59.94/50), 1080p (30/29.97/25/24/23.98), 1080Psf (30/29.97/25/24/23.98), 720P(60/59.94/50/30/29.97/25/24/23.98) SMPTE 296M (YCbCr 4:2:2) 1280 x 720p (60,59.94,50) SMPTE 125M (YCbCr 4:2:2) 480i (59.94) ITU-R BT.601 (YCbCr 4:2:2) 576i (50) 2K Format (YCbCr 4:2:2) COMPONENT 1080P (60/59.94/50, 30/29.97/25/24/23.98) 1080i (60/59.94/50), 720P(60/59.
TROUBLESHOOTING GUIDE - Check the following before calling for service. - If the same problems continue after checking, contact the reseller you purchased the monitor from. At start Only black-and-white display Power on but no pictures Wrong or abnormal colors When on the picture shows size error Other problems We recommend that you test with different input sources when you have trouble with the current input source. If symptom persists, follow the instructions below.
NOTE 14 Visit the ViewZ USA website at https://www.viewzusa.
