Installation Guide

SINK SPECIFICATIONS

Glass Vessel Sink

Model VG07057

MODEL # SINK SINK HOLE

DIAMETER HEIGHT DIAMETER

VG07057 16 1/2" 6 " 1 3/4"

DIMENSIONS

MODEL VG07057

FEATURES









PACKING LIST



16 1/2"

TOLL FREE: (866) 591 - 7792

E-Mail: techmail@vigoindustries.com

www.vigoindustries.com

For warranty purposes contact our toll free number:

PAGE 1
SINK SPECIFICATIONS Glass Vessel Sink Model VG07057 MODEL VG07057 FEATURES PACKING LIST DIMENSIONS MODEL # SINK DIAMETER 16 1/2" VG07057 SINK HEIGHT 6" For warranty purposes contact our toll free number: TOLL FREE: (866) 591 - 7792 www.vigoindustries.com 6" E-Mail: techmail@vigoindustries.
PAGE 2
6" 16 1/2" FRONT VIEW 1 3/ 4" TOP VIEW NOTE: GLASS THICKNESS 1/2" GLASS DIAMETER AND HEIGHT MAY VARY UP TO 1/ 2" MODEL VG07057 THE MEASUREMENTS IN INCHES ARE ROUNDED TO THE NEAREST 1/8" 2
PAGE 3
PACKAGE CONTENTS ASSEMBLY 1. Please inspect your working surface, making sure it is level and clean. 2. Determine the layout for the sink you desire. It is important to fully "dry" position the sink with your faucet purchase on the countertop. Things to include, but are not limited to; LAVATORY REQUIRED TOOLS Plumber's putty or Caulk Caulking Gun Tape Measure SAFETY TIPS Observe all local plumbing and building codes. Risk of personal injury or product damage. Handle with care.
PAGE 4
GLASS SINK LIMITED LIFETIME WARRANTY EFFECTIVE JANUARY 1, 2010 household use. For commercial uses, additional limitations apply. VIGO warrants the Product to be free from defects in workmanship and materials under normal use and service for the period commencing from the initial date of purchase by the owner or end-user, contractor, or builder, from VIGO or an authorized VIGO dealer, through the lifetime of the original owner or end-user.