Use and Care

17
USA
On/Off Key
When you press the On/Off key, the
indicator lights illuminate on the display
for ON position. The lights turn off in
OFF position.
PROGRAM SELECTION /
PROGRAM CANCEL KEY
Select the desired program using the
“program selection keys” and press the
button.
To cancel the running program, open
the door of the machine and press and
hold the Program Start/Pause/Cancel
key for 3 seconds.
After the 3 - 2 - 1 countdown, 0:01 is
displayed, close the door of the product
and wait for the draining process
complete. Draining is completed in
2 minutes and the machine gives an
audible warning when it is completed.
FUNCTION KEYS
If you press any of the Function keys
during program selection or time delay
selection, an affirmative key signal will
be heard provided that the relevant
function is supported by the selected
program. Function will be deemed
selected when the indicator of the
selected function is lit.
To cancel the selected function, keep
the function key pressed until the
function indicator disappears.
PREPARING THE MACHINE
1. Open the door of the dishwasher.
2. Place the dishes in accordance
with the instructions in the user
manual.
3. Make sure that the upper and lower
impellers rotate freely.
4. Put adequate amount of detergent
into the detergent dispenser.
PROGRAM SELECTION
1. Press the On/Off button to turn on
your machine.
2. Check the Salt and Rinse Aid
indicators and add salt and/or rinse
aid if needed.
3. Refer to the table of "Program data
and average consumption values"
to determine a washing program
suitable for your dishes.
4. Selected program will start
when you close the door of your
machine.