Manualshelf

Outdoor Planning Guide Brochure

ManualsBrandsViking ManualsOutdoor Kitchen Equipment Packages3-Piece Grill Package with VQGI5420NSS 42" Built-In Natural Gas Grill, VGSB5153NSS 15" Side Burner and AD52820SS 32" Access Door in Stainless Steel
11121314151617181920
16
WHEN TO USE INSIDE AND OUTSIDE FILLER STRIPS TOGETHER
(SEE SAMPLE DRAWING BELOW)
In situations where the back of your cabinet layout is exposed, such as in an island setting, inside and outside ller
strips will need to be used. Use a 90° (VCF90) or 135° (VCF135) inside ller whenever you have a 90 or 135 degree
turn. Depending on which turn you are accounting for, a 90° (VOCF90) or 135° (VOCF135) outer corner back panel
assembly must be used to complete the layout. These assemblies consist of a 4”W. stainless steel “post”, two
mounting brackets, and two stainless steel back panels.
The post is placed in the middle corner of the void area (see diagram below) and the back panels are attached to
it. The post gives support to the void area underneath the countertop that falls in between the cabinets. Next, the
supplied brackets are attached to the inside of the two adjacent cabinets in the run. The stainless steel back panels
are then attached to the brackets and t ush with the back panels attached to the back of the cabinets to the right
and left of the center post.
VBBO1601
VSP30
VBP18
VQBO4121
VCF90
VBP18
VSP30
VSP30
VOCF90
VBO1811
VBO1830
VBP16 VBPFLR4 VBP41 VOCF90 Back Panel
VOCF90 Back Panel
VFLR4