Viking Installation Guide Viking Range Corporation 111 Front Street Greenwood, Mississippi 38930 USA (662) 455-1200 For product information, call 1-888-VIKING1 (845-4641) or visit the Viking Web site at vikingrange.
Table of Contents Warnings & Important Information____________________________________________________________3 Professional Dimensions (36” Bottom-Mount & French Door Bottom-Mount) __________________________6 Specifications (36” Bottom-Mount & French Door Bottom-Mount) ________________________7 Designer Dimensions (36” French Door Bottom-Mount) ____________________________________________8 Specifications (36” French Door Bottom-Mount) __________________________________________9 Proper Disposal ____________
Refrigerator Safety IMPORTANT– Please Read and Follow A GFI shall be used if required by NFPA70 (National Electric Code), federal/state/local laws, or local ordinances. • The required use of a GFI is normally related to the location of a receptacle with respect to any significant sources of water or moisture. • Viking Range Corporation will NOT warranty any problems resulting from GFI outlets which are not installed properly or do not meet the requirements below.
Dimensions Specifications (Professional) 36” Professional French Door 35 w/ sid (91-7/8 e p .1 ” an cm els ) ac ce (Professional) Professional French Door Bottom-Mount Description VCFF136D Overall width 35-5/8” (90.5 cm) Addition of side panels: 35-7/8” (91.1 cm) Overall height To top of door: 69-7/8” (177.5 cm) min. to 70-5/8” (179.4 cm) max. To top of hinge cap: 69-5/8” (176.8 cm) min. to 70-3/8” (178.8 cm) max. To top of cabinet: 68-3/8” (173.7 cm) min. to 69-1/8” (175.6 cm) max.
Dimensions Specifications (Designer) 36” Designer French Door 35 w/ sid (91-7/8 e p .1 ” an cm els ) ac ce (Designer) Designer French Door Bottom-Mount Description DDFF136D Overall width 35-5/8” (90.5 cm) Addition of side panels: 35-7/8” (91.1 cm) Overall height To top of door: 69-7/8” (177.5 cm) min. to 70-5/8” (179.4 cm) max. To top of hinge cap: 69-5/8” (176.8 cm) min. to 70-3/8” (178.8 cm) max. To top of cabinet: 68-3/8” (173.7 cm) min. to 69-1/8” (175.6 cm) max.
Proper Disposal (of old refrigerator) Important Safety Instructions IMPORTANT: Child entrapment and suffocation are not problems of the past. Junked or abandoned refrigerators are still dangerous - even if they will sit for “just a few days.” If you are getting rid of your old refrigerator, please follow these instructions to help avoid accidents. Before You Throw Away Your Old Refrigerator or Freezer: • Take off the doors. • Leave the shelves in place so that children may not easily climb inside.
General Information General Information Clean Before Using Your refrigerator was packed carefully for shipment. Remove and discard all packaging and tape. DO NOT remove the model/serial number label. After you remove all of the packaging materials, clean the inside of your refrigerator before using it. See the cleaning instructions in “Use and Care Guide.” Important information to know about glass shelves and covers: DO NOT clean glass shelves or covers with warm water when they are cold.
General Information Doors & Drawer Removal Water Supply Requirements Remove and Replace Handles A cold water supply with water pressure of between 35 and 120 psi (241 and 827 kPa) is required to operate the water dispenser and ice maker. If you have questions about your water pressure, call a licensed, qualified plumber. Reverse Osmosis Water Supply (cont.) • If your refrigerator has a water filter, it may further reduce the water pressure when used in conjunction with a reverse osmosis system.
Door & Drawer Removal (cont.) Installation Replace Doors and Hinges Replace Drawer Front Water Supply Requirements Connect the Water Supply 1. Assemble the parts for the top hinge as shown in Top Hinge graphic. DO NOT tighten the screws completely. 2. Replace the parts for the bottom hinge as shown in Bottom Hinge graphic. Tighten screws. Replace the refrigerator door. Note: Provide additional support for the refrigerator door while the hinges are being moved.
Installation Leveling Connect to Water Line (cont.) 5. Using an adjustable wrench, hold the nut on the plastic water line to keep it from moving. Then, with a second wrench, turn the compression nut on the copper tubing counterclockwise to completely tighten. Do not overtighten. 6. Fasten the shutoff valve to the cold water pipe with the pipe clamp. Be sure the outlet end is solidly in the 1/4" drilled hole in the water pipe and that the washer is under the pipe clamp. Tighten the packing nut.
Door Alignment (French Door Bottom-Mount) Performance Checklist 2 1 To raise left side door, turn leveler foot screw clockwise. Remove toe grille. Grasp firmly and pull outward to unclip. 3 4 Replace toe grill. Align the toe grille mounting clips with the lower cabinet slots. Push the toe grille firmly until it snaps into place. To raise left side door, turn leveler foot screw clockwise. h Plug-in refrigerator and verify operation.
Service & Registration Notes Only authorized replacement parts may be used in performing service on the appliance. All servicing should be referred to a qualified technician.