use and_care_guide

29
USA
A smear remains on glasses that resembles milk stain which can not be removed when wiped by hand. A bluish
/ rainbow appearance occurs when the glass is pointed to light.
• Excessive rinse aid is used. >>>Lower rinse aid setting. Clean the spilled rinse aid when adding rinse aid.
• Corrosion has occurred on glass due to soft water. >>> Measure the hardness of the supply water appropriately
and check the water hardness setting. If your supply water is soft (<15 gpg), do not use salt. Choose programs that
wash in higher temperatures (140-149 degress Fahrenheit). You can also use glass protective detergents that are
commercially available.
Foam forms in the machine.
• Dishes are washed with hand-wash detergent by hand but not rinsed before placing them into the machine. >>>
Hand-wash detergents do not contain antifoam. There is no need to hand-wash the dishes before placing them into
the machine. Remove heavy soil on the dishes under tap water, with a sponge or towel.
• Rinse aid has spilled into the machine when adding rinse aid. >>> Take care that rinse aid is not spilled in the
machine when you are filling it. Clean any spilled rinse ait with the help of a tissue paper/towel.
• Lid of the rinse aid reservoir is left open. >>> Make sure that the lid of the rinse aid reservoir is closed after adding
rinse aid.
Kitchen utensils are broken.
• Dishes are not placed orderly in the machine. >>> Load the dishes as described in the user manual.
• Baskets are overloaded. >>> Do not overload the baskets in excess of their capacity.
Water remains in the dishwasher at the end of the program.
• Filters are clogged. >>> Check if the filter system is clean. Clean the filter system regularly as illustrated in section
“Cleaning and Care”.
• Discharge hose is clogged/blocked. >>> Check the discharge hose. If necessary, remove the discharge hose, clear
the blockage and insert is as illustrated in the user manual.
C
If you cannot eliminate the problem although you follow the instructions in this section, consult your dealer or
the Authorized Service Agent. Never try to repair a nonfunctional product yourself.
12. TECHNICAL FEATURES
Load capacity
Permissible water
pressure
4.35 - 145 psi (0.3 - 10 bars)
Electrical connection 120 V (volts), 12 A (amps), 60Hz (hertz)
Total power 1400 W (watts)
Heater power 1100 W (watts)
C
NOTICE: Because we continually strive to improve our products, we may change our specifications and
design without prior notice.
This device corresponds to the following directives:
UL 749 Household Dishwasher directive.