use and_care_guide

8
USA
4.1 UPPER RACK
Load the upper rack with dessert plates, cups, glasses etc.
ADJUSTABLE SHELVES
(Select Models)
Depending on the size of the glasses and cups, the shelf
height setting may be adjusted.
1. Fold the shelf upwards A.
2. Positioning at the desired height B.
3. Fold the shelf again downwards C.
COLLAPSIBLE UPPER BASKET WIRES
(Select Models)
You can use collapsible wires when you need a larger
space for your dishes in the upper basket of your machine.
To bring the collapsible wires into horizontal position, grab
the wire from the middle position and push them in the
direction of arrow in the figure. Place your larger dishes
into the area created. To bring the wires back to vertical
position, just lift them up.
C
Bringing the wires to the horizontal
position by holding them from the tips
may cause them to bend. Therefore,
hold the wires from their stems while
bringing them to the horizontal or vertical
positions.
ADJUSTING THE HEIGHT OF THE UPPER BASKET
(Select Models)
The upper basket height adjustment mechanism has been
designed for you to create large spaces in the lower or
upper sections of your machine depending on your needs
by adjusting the height in the upper or lower direction while
your basket is empty or loaded.
Thanks to this mechanism, you can use your basket in
three different positions lower, middle and upper positions
(1, 2, 3).
1. To raise your basket, hold the upper basket wires
with both hands while the basket is in the lowermost
position and pull them up (A).
2. You will hear a "Click" from the right and left
mechanisms, indicating that the basket has reached
the next level. Release the basket.
Repeat the process if the height is not sufficient.
1
2
3
To lower the basket, while it is in the uppermost position;
1. Hold the upper basket wires with both hands, slightly
lift up the basket and simultaneously push and release
the latches shown in the figure (B).
2. Lower the basket from its current position to the lower
one.
3. Release the basket after it has reached one level
down.
Repeat the process if the height is not sufficient.
C
The movement mechanism may not
function properly if the upper basket is
overloaded or if the weight distribution is
not balanced. In heavier conditions, there
is the risk of falling one level down.
C
Make sure that the adjustment mechanism
has the same positions on the right and
left sides of the upper basket.