Installation Instructions

Measurement (A)

+1/4”

(.64 cm)

64 cm)

Measurement (A)

+1/4” (.64 cm)

7-3/16”

(18.3 cm)

(18.3 cm

)

7-3/16”

(18.3 cm)

Measure from floor to bottom of the anti-tip opening

located on the back of range.

This will be measurement (A).

Locate anti-tip bracket on rear wall with the top left corner at

measurement (A) plus 1/4” (.64 cm) from the floor and 7-3/16”

(18.3 cm) from where the right side of range (facing range) is to be

located.

Mark and drill holes where bracket will be located.

Attach bracket with mounting hardware provided.

WARNING

TIPPING HAZARD

• This range can tip.

• A child or adult can tip the and be

killed.

• Failure to install the anti-tip

device can result in death or

serious burns to children or

adults.

• If the range is moved, then the

anti-tip device must be re-

engaged.

Anti-tip Device Installation

Wall Mount

WARNING

TIPPING HAZARD

To reduce the risk of the appliance

tipping, it must be secured by a

properly installed anti-tip bracket(s).

To make sure the bracket has been

installed properly, look behind the

range with a flashlight to verify

proper installation engaged in the

rear top left corner of the range or

under the range to verify that a floor hook and

bracket have been installed.